Improving <scp>glass‐fiber</scp> epoxy composites via interlayer toughening with polyacrylonitrile/multiwalled carbon nanotubes electrospun fibers
نویسندگان
چکیده
The development of innovative engineered epoxy composites aiming to manufacture cost-efficient materials with reduced weight and enhanced physical properties remains as a current industrial challenge. In this work we report an original procedure for manufacturing glass-fiber reinforced nanocomposites (GFECs) by employing electrospun fiber-mats reinforcing phase. These fibers have been produced from polyacrylonitrile multiwalled carbon nanotubes solutions. Optimal protocols are designed combining Taguchi method the morphological, structural mechanical obtained scanning electron microscopy, profilometry tensile tests. It is demonstrated that GFECs fabricated using GF800 glass fiber show improvement/enhancement fracture strain up 500 MPa (around 20% higher than non-reinforced composite counterpart). also shown GF3M exhibited reduction roughness 56%, which corresponds improvement N8 N7 following guidelines provided ISO 1302. results suggest type would be suitable used in aeronautics automotive industries.
منابع مشابه
Toughening of epoxy matrices with reduced single-walled carbon nanotubes.
Reduced single-walled carbon nanotubes (r-SWCNT) are shown to react readily at room temperature under inert atmosphere conditions with epoxide moieties, such as those in triglycidyl p-amino phenol (TGAP), to produce a soft covalently bonded interface around the SWCNT. The soft interface is compatible with the SWCNT-free cross-linked cured matrix and acts as a toughener for the composite. Incorp...
متن کاملStrengthening and stiffening carbon fiber epoxy composites by halloysite nanotubes, carbon nanotubes and silicon carbide whiskers
متن کامل
Finite Element Analysis of Low Velocity Impact on Carbon Fibers/Carbon Nanotubes Reinforced Polymer Composites
An effort is made to gain insight on the effect of carbon nanotubes (CNTs) on the impact response of carbon fiber reinforced composites (CFRs) under low velocity impact. Certain amount of CNTs could lead improvements in mechanical properties of composites. In the present investigation, ABAQUS/Explicit finite element code (FEM) is employed to investigate various damages modes of nano composites ...
متن کاملToughening of Epoxy Adhesives by Combined Interaction of Carbon Nanotubes and Silsesquioxanes
The extensive use of adhesives in many structural applications in the transport industry and particularly in the aeronautic field is due to numerous advantages of bonded joints. However, still many researchers are working to enhance the mechanical properties and rheological performance of adhesives by using nanoadditives. In this study the effect of the addition of Multi-Wall Carbon Nanotubes (...
متن کاملColumn buckling of multiwalled carbon nanotubes with interlayer radial displacements
An elastic model is presented for column buckling of a multiwalled carbon nanotube embedded within an elastic medium. The emphasis is placed on the role of interlayer radial displacements between adjacent nanotubes. In contrast to an existing model which treats the entire multiwalled nanotube as a single column, the present model treats each of the nested tubes as an individual column interacti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Polymer Science
سال: 2022
ISSN: ['1097-4628', '0021-8995']
DOI: https://doi.org/10.1002/app.53400