Improving Mini-LED Pattern Quality by Using Distributed Bragg Reflector and Digital Twin Technology

نویسندگان

چکیده

Fine-pitch backlight technology is rapidly evolving along with display technology, and chips are increasingly designed for direct integration modules. This study used a distributed Bragg reflector (DBR) mini light-emitting diode (mini-LED) backlights high dynamic contrast developed digital twin design by using (LED) (DBR).

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Distributed-bragg-reflector Lasers Grown by Chemical Beam Epitaxy

KAWACHI, M. : ‘Silica-based planar lightwave circuit technologies’. hoc. 17th European Conf. on Optical Communication, 8th Int. Conf. on Integrated Optics and Optical Fibre Communication, September 1991, pp. 51-58 YALETTE, S., RENARD, S., D E W H., IADOT, 1. P., FOURNIE& A., PHILIPPE, P., GIDON, P., GROUILLET, A. M., and DESGRANGES, D.: ‘Si-based integrated optics technologies’, Solid State Tec...

متن کامل

Asymmetric Twin-Waveguide 1.55- m Wavelength Laser with a Distributed Bragg Reflector

We demonstrate a single frequency, 1.55 m wavelength laser based on an asymmetric twin-waveguide structure using a single growth step and a simple fabrication process. The external Bragg grating is formed on the passive ridge waveguide, optically coupled to the twin-guide gain section using a low loss, tapered mode transformer. The grating is produced by near-field holographic printing using a ...

متن کامل

Ultra-short distributed Bragg reflector fiber laser for sensing applications.

We present an ultra-short distributed Bragg reflector fiber laser written in Er/Yb co-doped fiber. The entire laser is only 8.4 mm in length. The lasing threshold is less than 1 mW. The optical signal-to-noise ratio of the laser output is better than 70 dB. The laser emits two orthogonal polarization modes and generates a beat signal with signal-to-noise ratio of approximately 70 dB and 3-dB li...

متن کامل

Melt-processed all-polymer distributed Bragg reflector laser.

We have assembled and studied melt-processed all-polymer lasers comprising distributed Bragg reflectors that were fabricated in large sheets using a co-extrusion process and define the cavities for dye-doped compression-molded polymer gain core sheets. Distributed Bragg reflector (DBR) resonators consisting of 128 alternating poly(styrene) (PS) and poly(methyl methacrylate) (PMMA) layers were p...

متن کامل

S-band multiwavelength Brillouin/Raman distributed Bragg reflector fiber lasers.

A multiwavelength Brillouin/Raman distributed Bragg reflector fiber laser operating in the S-band region is proposed and demonstrated. The laser uses a 7.7 km long dispersion-shifted fiber with an effective mode area of 15 μm(2) as the Brillouin and Raman gain media simultaneously. Two 1420 nm laser diodes with a combined power of 372 mW are used as pump sources, while a fiber Bragg grating wit...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Crystals

سال: 2022

ISSN: ['2073-4352']

DOI: https://doi.org/10.3390/cryst12040529