Improving Bond Strength And Thermal Behaviour Of New Sodalite Infiltrate Ceramic Core Materials
نویسندگان
چکیده
منابع مشابه
Microtensile Bond Strength of Three Restorative Core Materials with IPS e.max Press Ceramic by Two Resin Cements
Objectives: The aim of this study was to compare the microtensile bond strengths (µ TBS) of three core materials with one lithium disilicate reinforced ceramic using two resin cements. Methods: Three core materials (Nulite F® (Biodental Technologies), Filtek Z250® (3M-ESPE), Prettau-Anterior® (Zirkonzhan, Germany)) were prepared as blocks (10×10×4 mm3) according...
متن کاملStudies on mechanical strength, thermal expansion of layering porcelains to alumina and zirconia ceramic core materials.
The aim of this study was to evaluate and clarify the various mechanical properties and behavior of layering porcelains (Tokuyama Dental Ceramic, IPS Empress 2, Cerabien, Vitadura, Creation) used for veneering high-strength ceramic core materials. The layering porcelains studied exhibited the following range of mechanical properties: compressive strength at 586-1091 MPa, bending strength at 30-...
متن کاملMechanical properties of commercial high strength ceramic core materials.
OBJECTIVE The objective of the present study is to evaluate and compare the flexural strength, dynamic elastic moduli and true hardness (H(o)) values of commercial Vita In-Ceram alumina core and Vita In-Ceram matrix glass with the standard aluminous porcelain (Hi-Ceram and Vitadur), Vitadur N and Dicor glass and glass-ceramic. METHODS The flexural strength was evaluated (n=5) using 3-point lo...
متن کاملEvaluation of the Effect of Sandblasting (120 μm) on Shear Bond Strength between Ceramic Veneer and Zirconia Core
Background and Aim: Due to the importance of the bond strength between zirconia core (ZC) and porcelain veneer (PV) as well as the paradox about the functionality of sandblasting on the solidity between those layers, this research aimed to evaluate the effect of sandblasting on the shear bond strength (SBS) between ZC and PV. Materials and Methods: After preparing 20 zirconia discs (7 mm &time...
متن کاملmicrotensile bond strength of three restorative core materials with ips e.max press ceramic by two resin cements
objective: the aim of this study was to compare the microtensile bond strengths (μ tbs) of three core materials with one lithium disilicate reinforced ceramic using two resin cements. methods: three core materials (nulite f® (biodental technologies), filtek z250® (3m-espe), prettau-anterior® (zirkonzhan, germany)) were prepared as blocks (10×10×4 mm3) according to the manufacturer’s instruction...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IIUM Medical Journal Malaysia
سال: 2017
ISSN: 2735-2285,1823-4631
DOI: 10.31436/imjm.v16i2.1075