Improvements in Cutting Efficiency of Ti-6Al-6V-2Sn Titanium Alloy (1st Report)
نویسندگان
چکیده
منابع مشابه
Hot Deformation Behavior of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe Alloy in α + β Field
The deformation behavior of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe high strength β titanium alloy is systematically investigated by isothermal compression in α + β field with the deformation temperatures ranging from 1003 K to 1078 K, the strain rates ranging from 0.001 s to 1 s and the height reduction is around 50%. Essentially, the flow stress-strain curve of isothermal compression in α + β field exh...
متن کاملPrecision Grinding of Titanium (Ti-6Al-4V) Alloy Using Nanolubrication
In this current era of competitive machinery productions, the industries are designed to place more emphasis on the product quality and reduction of cost whilst abiding by the pollution-preventing policy. In attempting to delve into the concerns, the industries are aware that the effectiveness of existing lubrication systems must be improved to achieve power-efficient and pollutionpreventing ma...
متن کاملCutting Properties Analysis of Titanium Alloy (Ti-6Al-4V) Base on Cryogenic Cooling
This paper studied the cutting properties of Ti-6Al-4V under cryogenic cooling to find a solution of improvement in tool load-carrying, thermal stress, tool life and finish quality. Firstly, this paper established a 3-D cutting model of Ti-6Al-4V under cryogenic cooling with liquid nitrogen, and then set the parameters of material, friction model and cutting conditions. Based on this model, the...
متن کاملFatigue and corrosion fatigue properties of Ti-6Al-4V implant grade titanium alloy in Ringer solution
Nowadays modification of metallic biomaterials which are used as implants for bone and hard tissues replacement is considered as an important subject. In the current study, corrosion fatigue properties of Ti-6Al-4V alloy investigated via Rotating-Bending standard test method and then, the results compared with the fatigue properties of the specimens tested in the same conditions. Scanning elect...
متن کاملThe Effect of Nose Radius on Cutting Force and Temperature during Machining Titanium Alloy (Ti-6Al-4V)
This paper presents a study the effect of nose radius (Rz-mm) on cutting force components and temperatures during the machining simulation in an orthogonal cutting process for titanium alloy (Ti-6Al-4V). The cutting process was performed at various nose radiuses (Rz-mm) while the depth of cut (d-mm), feed rate (fmm/tooth) and cutting speed (vc-m/ min) were remained constant. The main cutting fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 1993
ISSN: 0912-0289,1882-675X
DOI: 10.2493/jjspe.59.921