Improvement Voltage Profile of Kurdistan Power System By Using SVC/STATCOM
نویسندگان
چکیده
The surge in demand for electricity has driven the power system to operate at a lower efficiency level. With many actions taken improve electric grid, voltage unbalance and line overload have become challenging problems address. Voltage control can be determined generation, transfer, usage. When is under stress, reactive current significantly contributes instability. To maximize of system, flexible transmission systems (FACTS) devices must used most effectively feasible. FACTS like Static VAR Compensators (SVCs) Synchronous (STATCOMs) reduce instability heavily burdened lines, resulting losses more excellent network reliability. In this paper, controllers such as SVC STATCOM are incorporated Kurdistan simulated by using PSAT software based on MATLAB improvement profile, minimization losses, cost system. Also, graphical comparisons results presented investigate effectiveness proposed methods.
منابع مشابه
Improvement of Voltage Profile and Reduce Power System Losses by using Multi Type Facts Devices
In emerging electric power systems, increased transactions often lead to the situations where the system no longer remains in secure operating region. The flexible Ac transmission system (FACTS) controllers can play an important role in the power system security enhancement. However, due to high capital investment, it is necessary to locate these controllers optimally in the power system. FACTS...
متن کاملImprovement of Transient Voltage Profile Using Power Control of the DFIG-Based Wind Farm Under Severe Voltage Dip Event
Improving transient voltage stability is one of the most important issues that must be provided by doubly fed induction generator (DFIG)-based wind farms (WFs) according to the grid code requirement. This paper proposes adjusted DC-link chopper based passive voltage compensator and modified transient voltage controller (MTVC) based active voltage compensator for improving transient voltage stab...
متن کاملVoltage Stability Improvement in Power System by Using Statcom
Voltage stability problems usually occur in heavily loaded systems. Nowadays the power demand increases enormously, hence in a large interconnected power system network subject to stress conditions. This situation can be handled by increasing the generation or reducing the transmission losses. When the load increases suddenly, voltage magnitude also varies beyond the permissible voltage stabili...
متن کاملImproving the Voltage Profile of the Power System Using PV-STATCOM
This paper presents a novel concept of utilizing the photo voltaic solar farm inverter as STATCOM(Static Compensator), named PV-STATCOM, in order to improve the voltage profile of the power system. The entire STATCOM is able to transmit either active or reactive power into the grid. This system is connected to a 14 BUS IEEE standard grid as a case study to simulate the performance of the system...
متن کاملOptimal DG Placement for Power Loss Reduction and Improvement Voltage Profile Using Smart Methods
Distributed Generations (DGs) are utilized to supply the active and reactive power in the transmission and distribution systems. These types of power sources have many benefits such as power quality enhancement, voltage deviation reduction, power loss reduction, load shedding reduction, reliability improvement, etc. In order to reach the above benefits, the optimal placement and sizing of DG is...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Govarî Qe?a
سال: 2023
ISSN: ['2518-6558', '2518-6566']
DOI: https://doi.org/10.25212/lfu.qzj.8.2.49