Improvement of perovskite solar cell performance by oleylamine treatment of CuSCN hole-transport layer
نویسندگان
چکیده
Abstract Post-treatment of perovskite solar cells with CuSCN hole-transport layers to enhance their photovoltaic performance was investigated. Crystallinity and uniformity were improved by recrystallisation caused oleylamine (OA) treatment. Further, the OA adsorbed on tuned VB edge potential hole extraction from materials. Power conversion efficiency CuSCN-based 8.58% 11.4%.
منابع مشابه
Substantial improvement of perovskite solar cells stability by pinhole-free hole transport layer with doping engineering
We fabricated perovskite solar cells using a triple-layer of n-type doped, intrinsic, and p-type doped 2,2',7,7'-tetrakis(N,N'-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD) (n-i-p) as hole transport layer (HTL) by vacuum evaporation. The doping concentration for n-type doped spiro-OMeTAD was optimized to adjust the highest occupied molecular orbital of spiro-OMeTAD to match the v...
متن کاملHole-Transport Materials for Perovskite Solar Cells.
The pressure to move towards renewable energy has inspired researchers to look for ideas in photovoltaics that may lead to a major breakthrough. Recently the use of perovskites as a light harvester has lead to stunning progress. The power conversion efficiency of perovskite solar cells is now approaching parity (>22 %) with that of the established technology which took decades to reach this lev...
متن کاملPerovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20.
Perovskite solar cells (PSCs) with efficiencies greater than 20% have been realized only with expensive organic hole-transporting materials. We demonstrate PSCs that achieve stabilized efficiencies exceeding 20% with copper(I) thiocyanate (CuSCN) as the hole extraction layer. A fast solvent removal method enabled the creation of compact, highly conformal CuSCN layers that facilitate rapid carri...
متن کاملPerovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies > 20 %
Perovskite solar cells (PSC) with efficiencies > 20% have only been realized with highly expensive archetype organic hole transporting materials that can impede the large-scale deployment of PSC. Here we demonstrate PSCs achieving stabilized efficiencies of 20.3% with CuSCN as hole electron extraction layer. We developed a new method for the solution deposition of compact and highly conformal C...
متن کاملRole of 4-tert-Butylpyridine as a Hole Transport Layer Morphological Controller in Perovskite Solar Cells.
Hybrid organic-inorganic materials for high-efficiency, low-cost photovoltaic devices have seen rapid progress since the introduction of lead based perovskites and solid-state hole transport layers. Although majority of the materials used for perovskite solar cells (PSC) are introduced from dye-sensitized solar cells (DSSCs), the presence of a perovskite capping layer as opposed to a single dye...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Japanese Journal of Applied Physics
سال: 2023
ISSN: ['0021-4922', '1347-4065']
DOI: https://doi.org/10.35848/1347-4065/accda6