Improvement of Heat Flux Measurement on Combustion Chamber of Spark Ignition Engine : Conditions of Thin Film Type of Heat Flux Sensor for Heat Flux Measurement of Engine(Thermal Engineering)
نویسندگان
چکیده
منابع مشابه
Development of a Direct-Measurement Thin-Film Heat Flux Array
A new thin film heat flux array (HFA) was designed and constructed using a series of nickel/copper thermocouples deposited onto a thin Kapton® polyimide film. The HFA is capable of withstanding temperatures up to 300°C and produces signals of 40 μV/(W/cm). As a result of its thin film construction, the HFA is able to resolve heat flux signals as fast as 32 ms. Calibrations were completed to det...
متن کاملMeasurement of Boundary Conditions - Surface Heat Flux and Surface Temperature
In order to understand a heat transfer phenomenon, it is sometimes very important to know the change in heat flux and temperature with time or the distribution of the heat flux and temperature on the surface of a heating block. Furthermore, with the development of computational thermal-fluid dynamics, experimental data that are of the CFD level, both spatially and temporally, are needed to vali...
متن کاملMathematical Modeling and Numerical Investigation of Heat Flux at the External Surface of Cylinder of an Internal Combustion Engine
Abstract: This study deals with modeling of heat flux at the external surface of combustion chamber wall in an internal combustion (IC) engine as a function of crank angle. This investigation results in an inverse heat conduction problem in the cylinder wall. Alifanov regularization method is used for solving this inverse problem. This problem study as an optimization problem in which a square...
متن کاملTransient Temperature and Heat Flux Measurement in Ultrasonic Joining of Battery Tabs Using Thin-Film Microsensors
Process physics understanding, real time monitoring, and control of various manufacturing processes, such as battery manufacturing, are crucial for product quality assurance. While ultrasonic welding has been used for joining batteries in electric vehicles (EVs), the welding physics, and process attributes, such as the heat generation and heat flow during the joining process, is still not well ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 2010
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.76.765_859