Improved Welding Quality Prediction for Metal Inert Gas Welding using Artificial Intelligence
نویسندگان
چکیده
منابع مشابه
Artificial neural network modeling of weld joint strength prediction of a pulsed metal inert gas welding process using arc signals
This paper addresses the weld joint strength monitoring in pulsed metal inert gas welding (PMIGW) process. Response surface methodology is applied to perform welding experiments. A multilayer neural network model has been developed to predict the ultimate tensile stress (UTS) of welded plates. Six process parameters, namely pulse voltage, back-ground voltage, pulse duration, pulse frequency, wi...
متن کاملIntegrated Risk Estimation of Metal Inert Gas (mig) and Metal Active Gas (mag) Welding Processes
Taking into account the technical characteristics of the welding processes, associated with the fulfi lling clients’ requirements, the assurance of safe and healthy working places as well as the environment protection the fundamental meaning belongs to the application of the appropriate methods of risk assessment of these processes. The paper presents the results of risk analysis, using an inte...
متن کاملEvaluation Of Mechanical Properties Of Dissimilar Metal Tube Welded Joints Using Inert Gas Welding
Evaluation of welding process such as metal inert gas welding and tungsten inert gas arc welding on tensile, bend and hardness properties of austenitic stainless steel SS347H(18Cr 10Ni 1Cb ), T22(21⁄4Cr Mo) and T91(9Cr 1Mo V) grades are studied. Tubes of 54 mm of outer diameter and 4 mm of wall thickness is used as a base material in the following combination SS347H VS T91 and T91 VS T22 is wel...
متن کاملThe principle Of Tungsten Inert Gas (TIG) Welding Process
Process This chapter presents the principle of tungsten inert gas (TIG) welding process besides important components of TIG welding system and their role. This process is also known as gas tungsten arc welding (GTAW) process. Further, fundamentals of heat generation, arc stability and arc efficiency have also been described. Additionally, comparison of argon and helium as shielded gases has bee...
متن کاملControl of pulsed gas metal arc welding
This paper presents a control system for manual pulsed Gas Metal Arc Welding (GMAW). This system consists of a current controller, which makes it possible to shape the current during welding, and two important components, which are the key issues discussed in this paper. These components include an arc length controller and a metal transfer controller. The arc length controller is based on a no...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Scientific Research in Science, Engineering and Technology
سال: 2020
ISSN: 2394-4099,2395-1990
DOI: 10.32628/ijsrset207635