Improved tensile properties of Mg-8Sn-1Zn alloy induced by minor Ti addition
نویسندگان
چکیده
منابع مشابه
Influence of Equal Channel Angular Pressing Passes on the Microstructures and Tensile Properties of Mg-8Sn-6Zn-2Al Alloy
An I-phase containing Mg-8Sn-6Zn-2Al (wt %; TZA862) alloy was fabricated and subjected to different number of passes of equal channel angular pressing (ECAP) processing at 300 °C. The results showed that the alloys exhibited a bimodal microstructure, which consisted of fine dynamically recrystallized (DRX) grains and coarse non-DRX grains. When increasing the number of ECAP passes from 2 to 6, ...
متن کاملTexture investigation of the superelastic Ti-24Nb-4Zr-8Sn alloy
In this work, the influence of crystallographic texture on mechanical properties was investigated by X-ray diffraction in the superelastic Ti-24Nb-4Zr-8Sn alloy. Different textures were obtained by changing the cold rolling reduction rate and the following thermal treatment (solution treatment or flash thermal treatment). The tensile tests performed show that Young’s modulus, elongation at rupt...
متن کاملEffect of Aging Treatment on the Damping Capacity and Mechanical Properties of Mg-6Al-1Zn Alloy
The damping capacity and mechanical properties of Mg-6Al-1Zn alloy after heat treatment were investigated. The damping characteristics of un-heat-treated, solution treated, and aged Mg-6Al-1Zn specimens were determined by measuring the damping ratio and the logarithmic decrement of free vibrations of a bending beam clamped at one side. The microstructural evaluations confirmed that the β-Mg17Al...
متن کاملImproving the Mechanical Properties of Cu-15Ni-8Sn Alloys by Addition of Titanium
The effect of Ti addition on the microstructure and mechanical properties of Cu-15Ni-8Sn alloys was investigated. Optical microscopy (OM), scanning electronic microscopy (SEM), and transmission electron microscopy (TEM) were used to determine grain size and distribution of the second phases in the alloys. The results indicate that the tensile properties of Cu-15Ni-8Sn alloys are improved signif...
متن کاملInfluence of composition and purity on tensile properties of Ni-Ti alloy castings.
The influence of composition and purity of titanium on the mechanical properties and the transformation temperatures of Ni-Ti alloy dental castings was investigated by tensile testing and differential scanning calorimetry (DSC). The compositions of the ingots were 49.0-49.2 at% of titanium content. Three grades of titanium of relatively high purity were used as starting materials. The result sh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: China Foundry
سال: 2016
ISSN: 1672-6421,2365-9459
DOI: 10.1007/s41230-016-5073-3