Improved Pump Setpoint Selection Using a Calibrated Hydraulic Model of a High-Pressure Irrigation System
نویسندگان
چکیده
This paper presents a case study of the operational management Robinvale high-pressure piped irrigation water delivery system (RVHPS) in Australia. Based on datasets available, improved pump setpoint selection using calibrated hydraulic model is investigated. The first step was to implement pre-processing measured flow and pressure data identify errors possible faulty sensors. An EPANET simulation updated with pipe roughness height values by processed data. Then, new setpoints were selected given actual demands such that pressures network minimized subject required customer service standards. two-day simulation, it estimated 4.7% savings pumping energy cost as well reduction greenhouse gas emissions can be achieved applying setpoints.
منابع مشابه
CALCULATION OF OSMOTIC PRESSURE USING A CLOSED SYSTEM MODEL
In this work we have used a closed system model to derive an analytical equation for the osmotic pressure of two component electrolyte and non-electrolyte solutions. In order to do so, we have used an equation of state, known as the dense system equation of state (DSEOS), for the model system. Based on the model, a new definition is given for the osmotic pressure of a closed system. Good ag...
متن کاملA New Unique High-pressure Pump System
The combination of a 16 inch Pitot tube pump with a switched reluctance motor represents a significant development in the field of high-pressure pumping. A field proven Pitot tube pump design has been mechanically integrated with a high performance switched reluctance motor. The resulting system is approximately 40 percent of the size of the standard unit it replaces. The closecoupled pump elim...
متن کاملa study on construction of iranian life tables: the case study of modified brass logit system
چکیده ندارد.
15 صفحه اولinvestigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
DYNAMIC SIMULATION OF A HIGH PRESSURE REGULATOR
In this paper, the dynamic simulation for a high pressure regulator is performed to obtain the regulator behavior. To analyze the regulator performance, the equation of motion for inner parts, the continuity equation for diverse chambers and the equation for mass flow rate were derived. Because of nonlinearity and coupling, these equations are solved using numerical methods and the results are ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IFAC-PapersOnLine
سال: 2022
ISSN: ['2405-8963', '2405-8971']
DOI: https://doi.org/10.1016/j.ifacol.2022.11.012