Improved photoenergy properties of low-emissivity coatings deposited by sputtering with an ion gun treatment

نویسندگان

چکیده

This work studies the effect of ion treatment on low-emissivity (low-e) coatings deposited by magnetron sputtering. Specifically, we have investigated application an in dielectric layer before deposition a silver. reduces roughness which means silver can be with enhanced characteristics. We also evaluated etching rate SnO x due to already deposit equal thicknesses. Subsequently, studied effects coating's photoenergy properties. For equivalent coatings, found that those treated ions were more transparent visible region, reflective, and had lower emissivity, are essential requirements for low-e applied architectural glass. • Low-emissivity Ion gun improve coatings. Optimization properties

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Structural, mechanical and electrical-contact properties of nanocrystalline-NbC/amorphous-C coatings deposited by magnetron sputtering

Niobium-carbide nanocomposite coatings with a carbon content varying from 43 – 64 at.% were deposited by dual DC magnetron sputtering. X-ray diffraction, x-ray photoelectron spectroscopy and electron microscopy showed that all coatings consisted of nanometer sized NbC grains embedded in a matrix of amorphous carbon. Mechanical properties and electrical resistivity showed a strong dependency on ...

متن کامل

Effect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings

Titanium nitride thin films were grown on 304 stainless steel substrates at various nitrogen/argon flow ratios by ion beam sputtering (IBS) technique. The current research is a follow up study on the influence of gas ratio on structural and corrosion properties in the TiN coated 304 stainless steel. Film structural identification of phases was performed using X-ray diffractometry (XRD). Sca...

متن کامل

The tribological properties of Cu-Ni3Al-MoS2 composite coating deposited by magnetron sputtering

In industrial applications, most materials are exposed to wear and friction because multiple conditions are used. However, the tribological properties of these materials can be improved with different techniques. One such technique that improves the frictional property of a surface is the use of self-lubricating coatings. In this study, multicomponent coatings of nominal composition Cu-Ni3Al-Mo...

متن کامل

Optical and microstructural properties of MgF2 UV coatings grown by ion beam sputtering process

The optical, mechanical, and microstructural properties of MgF2 single layers grown by ion beam sputtering have been investigated by spectrophotometric measurements, film stress characterization, x-ray photoelectron spectroscopy ~XPS!, x-ray diffraction, and transmission electron microscopy. The deposition conditions, using fluorine reactive gas or not, have been found to greatly influence the ...

متن کامل

Photocatalytic Properties of Doped TiO2 Coatings Deposited Using Reactive Magnetron Sputtering

Mechanically robust photocatalytic titanium oxide coatings can be deposited using reactive magnetron sputtering. In this article, we investigate the effect of doping on the activity of reactively sputtered TiO2. Silver, copper and stainless steel targets were used to co-deposit the dopants. The films were characterised using XRD, SEM and EDX. Adhesion and mechanical properties were evaluated us...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Vacuum

سال: 2022

ISSN: ['0042-207X', '1879-2715']

DOI: https://doi.org/10.1016/j.vacuum.2022.111485