Improved Microstructures and Mechanical Properties of 2024 Aluminum Alloy Produced by a Reciprocating Extrusion Method
نویسندگان
چکیده
منابع مشابه
Anti-corrosive Properties of CeO2 Conversion Coatings on Aluminum Alloy 2024 Prepared by Dip Immersion Method
As an alternative to chromate conversion coatings, rare-earth coatings especially cerium, because of the low toxicity, have attracted considerable attention. Using dip immersion method, cerium-based conversion coating was deposited on aluminum 2024. Corrosion resistance was studied in 3.5 wt.% NaCl solution using potentiodynamic polarization, electrochemical impedance spectroscopy, and surface ...
متن کاملMulti-Track Friction Stir Lap Welding of 2024 Aluminum Alloy: Processing, Microstructure and Mechanical Properties
Friction stir lap welding (FSLW) raises the possibility of fabricating high-performance aluminum components at low cost and high efficiency. In this study, we mainly applied FSLW to fabricate multi-track 2024 aluminum alloy without using tool tilt angle, which is important for obtaining defect-free joint but significantly increases equipment cost. Firstly, systematic single-track FSLW experimen...
متن کاملThe Parameters Investigation and Hardness Optimization of A380 Aluminum Alloy produced by Mechanical Vibrator
The use of aluminum alloys in various industries, especially the automotive industries, to have less structural weight, is on the rise. The use of semi-solid forming process in addition to changes in the microstructure which improves the mechanical properties can reduce the volume of production and ultimately lead to the improvement of the structural weight. In this paper, optimization of the g...
متن کاملanti-corrosive properties of ceo2 conversion coatings on aluminum alloy 2024 prepared by dip immersion method
as an alternative to chromate conversion coatings, rare-earth coatings especially cerium, because of the low toxicity, have attracted considerable attention. using dip immersion method, cerium-based conversion coating was deposited on aluminum 2024. corrosion resistance was studied in 3.5 wt.% nacl solution using potentiodynamic polarization, electrochemical impedance spectroscopy, and surface ...
متن کاملMicrostructures and Mechanical Properties of TiCrZrNbNx Alloy Nitride Thin Films
The pure elements Ti, Zr, Cr, Nb were selected to produce an TiCrZrNb alloy target and deposited thin films thereof by a reactive high vacuum DC sputtering process. Nitrogen was used as the reactive gas to deposit the nitride thin films. The effect of nitriding on the properties of the TiCrZrNbNx film was tested by changing the nitrogen ratio of the atmosphere. All of the as-deposited TiCrZrNbN...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Transactions, JIM
سال: 1999
ISSN: 0916-1821,2432-471X
DOI: 10.2320/matertrans1989.40.233