Improved air-pump

Development of Air Pump for Fuel Cells

In recent years, as the mobile equipment advances, higher output and higher energy density are required of the battery which drives the mobile equipment. As one of the solutions, development of portable fuel cells (DMFC) with methanol used for fuel has been progressed and the fuel cells will be soon put to practical use. The authors have developed a small air pump (0.2W output), which is mounte...

Assessment and Deployment of Ground Source Heat Pump for Air Pollution Reduction in Tehran, Iran

The use of renewable energies, especially in metropolises has led to a reduction in environmental pollution and greater access to clean, renewable and sustainable energy. This paper evaluates the effectiveness of a national plan adopted by the Tehran city council for reducing air pollutions. This plan is designed to increase the share of renewable energies in residential buildings. This study a...

Air Source Heat Pump for Northern Climates Part I: Simulation of Different Heat Pump Cycles

Performance Comparison of Hydronic Secondary Loop Heat Pump and Conventional Air-Source Heat Pump

In residential heat pump systems, the motivation for secondary loop systems is to allow for the use of flammable or toxic refrigerants with lower global warming potentials than the currently employed HFC refrigerants. The addition of radiant panels as integral building components (embedded in concrete at construction or attached to the underside of wood flooring) is becoming more common. Combin...

Use of Carbon dioxide versus air blower in on-pump beating-heart coronary artery bypass surgery

Introduction:  The use of carbon dioxide blower has been recognized as the standard of care in patients undergoing beating coronary artery bypass grafting (CABG) due to higher solubility and lower risk of embolization. On the other hand, the compressed air blower has gone out of use since air can be easily trapped and is less soluble which can cause coronary embolism. The prese...