Impression of Vickers Hardness (Part 2)
نویسندگان
چکیده
منابع مشابه
Low-Load Vickers Microindentation Hardness Testing
ADVANCED MATERIALS & PROCESSES • APRIL 2012 I n 1925 in the UK, Smith and Sandland developed an indentation test that used a squarebased pyramidal-shaped indenter made of diamond[1]. The test was developed because the Brinell test (introduced in 1900), which (until recently) used a round hardened steel ball indenter, could not test steels harder than ~450 HB (~48 HRC). They chose this shape wit...
متن کاملComparative Depth of Cure Among Two Light-Cured Core Build-Up Composites By Surface Vickers Hardness
OBJECTIVE Depth of cure of composite material is restricted and it depends on many parameters such as thickness. The aim of this in-vitro study was to evaluate the depth of cure of two light-cured core build-up composites (Quixfil and Photocore) in different thicknesses, when cured for 60 seconds. MATERIALS AND METHODS The Vickers microhardness measurements were made for each side of the top ...
متن کاملVickers hardness and Specific wear resistance of E glass reinforced poly methyl methacrylate
Poly methyl methacrylate (PMMA) is one of the most widely accepted biomaterial in prosthetic dentistry due to its acceptable advantages. However the conventional PMMA used are far from being ideal because of their inferior mechanical properties. So the present study is to determine the Vickers Hardness and specific wear rate of the silane treated E glass fiber reinforced PMMA. Vickers Hardness ...
متن کاملInfluence of the shaping effect on hardness homogeneity by Vickers indentation analysis
Influence of the shaping effect on hardness homogeneity by Vickers indentation analysis B. Guillaume a,∗, F. Boschini a, A. Rulmont a, M. Ausloos b, R. Cloots a a Laboratoire de Chimie Inorganique Structurale, SUPRATECS, Department of Chemistry, Chemistry Inst. B6, University of Liège, Sart-Tilman, B-4000 Liège, Belgium b Physique Statistique et des Matériaux, SUPRATECS, Department of Physics, ...
متن کاملDiametral tensile strength and Vickers hardness of a composite after storage in different solutions.
This study evaluated the Vickers hardness (VHN) and diametral tensile strength (DTS) of the composite Z100 (3M ESPE) cured with: Quartz-Tungsten-Halogen light curing unit (QTH) (700mW/cm2- 40 s) and Argon laser (1,000mW/cm2- 10 s). Specimens of 2 mm depth and 8 mm diameter were immersed for 30 days at 37 degrees C in different storage means: water, alcohol, acetic acid, propionic acid and dry (...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Precision Engineering
سال: 1959
ISSN: 0374-3543
DOI: 10.2493/jjspe1933.25.298_457