Implementing an Embedded based Smart Street Light Controlling System through Piezo Electric Effect
نویسندگان
چکیده
منابع مشابه
Multi-body Aeroelastic Analysis of Smart Rotor Blades, Actuated by Means of Embedded Piezo-electric Devices
The paper describes an unusual C beam discretization based on the finite volumes concept. The formulation is developed in the linear (linearised) case first; eventually a non-linear multi-body approach to the same problem, based on previous works [9], is presented. The formulation is generalised to the piezo-electric beam in both cases, with reference to work [10]. Some applications are outline...
متن کاملHardware-Accelerated Embedded Controller for a Piezo-electric Haptic Feedback System
Piezo-electric ultrasonic actuators offer large static torque and precise rotary motion while avoiding self-motion when un-powered. In this work, a U164-11 ultrasonic piezo-electric module driving an Al2O3 ceramic ring is controlled by a Xilinx Spartan 6 FPGA to implement a haptic feedback system. The controller supports a runtime-adjustable capture detent resolution to enable the input of disc...
متن کاملEmbedded Firmware Diversity for Smart Electric Meters
Smart meters are now being aggressively deployed worldwide, with tens of millions of meters in use today and hundreds of millions more to be deployed in the next few years. These low-cost (' $50) embedded devices have not fared well under security analysis: experience has shown that the majority of current devices that have come under scrutiny can be exploited by unsophisticated attackers. The ...
متن کاملGSM Based Automated Embedded System for Monitoring and Controlling of Smart Grid
The purpose of this paper is to acquire the remote electrical parameters like Voltage, Current, and Frequency from Smart grid and send these real time values over GSM network using GSM Modem/phone along with temperature at power station. This project is also designed to protect the electrical circuitry by operating an Electromagnetic Relay. The Relay can be used to operate a Circuit Breaker to ...
متن کاملGSM Based Automated Embedded System for Monitoring and Controlling of Smart Grid
The purpose of this paper is to acquire the remote electrical parameters like Voltage, Current, and Frequency from Smart grid and send these real time values over GSM network using GSM Modem/phone along with temperature at power station. This project is also designed to protect the electrical circuitry by operating an Electromagnetic Relay. The Relay can be used to operate a Circuit Breaker to ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2017
ISSN: 2321-9653
DOI: 10.22214/ijraset.2017.3095