Impact Pull-Out Fracture of Steel Plates Jointed by Bolt
نویسندگان
چکیده
منابع مشابه
Biomechanics of bone-fracture fixation by stiffness-graded plates in comparison with stainless-steel plates
BACKGROUND In the internal fixation of fractured bone by means of bone-plates fastened to the bone on its tensile surface, an on-going concern has been the excessive stress-shielding of the bone by the excessively-stiff stainless-steel plate. The compressive stress-shielding at the fracture-interface immediately after fracture-fixation delays callus formation and bone healing. Likewise, the ten...
متن کاملFracture Mechanics of the Microbond and Pull-out Tests
The properties of the fiber/matrix interface in composites have an influence on their overall performance. Common methods for studying the interface are micromechanical tests that load a single fiber/matrix interface to failure. Two popular tests are the microbond test [1] and the single-fiber, pull-out test [2]. In a microbond test a droplet of matrix is sheared off the fiber by pulling the fi...
متن کاملEvaluation of Flow and Fracture Propensity of Notched Steel Plates by Means of a Photoelastic Model
The object of this investigation was to gain a better understanding of the flow and fracture propensity of steel plates in which the Wells-type notch served as the fracture initiator. This type of notch is of importance in experimental investigations of the brittle fracture phenomenon because it successfully initiates low-stress brittle fractures in the wide-plate specimen in which it is used. ...
متن کاملTreatment of a Mandibular Fracture by Two Perpendicular Mini-Plates
Introduction: In open reduction and internal fixation for the treatment of mandibular fracture, the fixation technique used is very important in reducing post-operative complications and promoting the healing process. This study assessed the results of fixation of the mandible using two mini-plates perpendicular to each other in the lower border of the mandible for fracture treatment. Materi...
متن کاملOptimized damage detection of steel plates from noisy impact test
Model-based non-destructive evaluation proceeds measuring the response after an excitation on an accessible area of the structure. The basis for processing this information has been established in recent years as an iterative scheme that minimizes the discrepancy between this experimental measurement and sequence of measurement trials predicted by a numerical model. The unknown damage that mini...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 2011
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.60.662