Impact of variable exhaust valve timing on diesel engine characteristics fueled with waste cooking oil biofuel blends: A numerical analysis
نویسندگان
چکیده
The quantity of the conventional sources energy such as petroleum, coal, and deposits hydrocarbon are limited in nature. rapid growth is observed industrial transportation section due to increase population that has compelled mankind look for an alternative fuels. Biodiesel can be a potential substitute its ease availability, accessibility, lower cost, nontoxic characteristics. In this study, waste cooking oil (WCO) feedstock biodiesel abundance low prices chosen. It been high have people reuse it multiple times, which negative health consequences inflammation, cholesterol issues, diabetes, cancer. However, if obtain WCO at reasonable they will refrain from reusing repeatedly. This article presents numerical method investigates effects variable exhaust valve timing on performance, emissions, combustion parameters different blends mechanical fuel injection system diesel. study was conducted using single-cylinder, water-cooled, in-line diesel engine running constant speed. As, not possible determine values timings experimentally, adopted. range taken 46–66° before bottom dead center (BDC) opening 6–20° after top (TDC) closing inlet 16° b TDC 33° BDC, respectively.
منابع مشابه
Emission Characteristics of a Diesel Engine fueled with Diesel-biodiesel-JP-4 Blends
The main objective of this research is to study the effects of JP-4-biodiesel-diesel fuel blends and operating parameters on the emission characteristics of a CI engine. The experimental tests were performed on a four-cylinder DI diesel engine. The Mixture-RSM method was used to develop mathematical models based on experimental data. The results showed that with the increase of the biodiesel pr...
متن کاملPerformance and Emission Characteristics of a Diesel Engine with Cottonseed Oil Plus Diesel Oil Blends
aIn the present study a 4-stroke 5hp diesel engine was tested with Diesel oil plus cottonseed oil blends. The blends in different proportions (10 to 50 percent by volume) were tested at constant speed of 1500 rpm. The said engine is operated at different loads and characteristics like Brake power, Brake thermal efficiency, specific fuel consumption etc. Engine performance for blends resulted in...
متن کاملPerformance and Emission Characteristics of Diesel Engine Fueled with Ethanol-Diesel Blends in Different Altitude Regions
In order to investigate the effects ethanol-diesel blends and altitude on the performance and emissions of diesel engine, the comparative experiments were carried out on the bench of turbo-charged diesel engine fueled with pure diesel (as prototype) and ethanol-diesel blends (E10, E15, E20 and E30) under different atmospheric pressures (81 kPa, 90 kPa and 100 kPa). The experimental results indi...
متن کاملPrediction of performance and exhaust emissions of a diesel engine fueled with biodiesel produced from waste frying palm oil
Biodiesel is receiving increasing attention each passing day because of its fuel properties and compatibility with the petroleum-based diesel fuel (PBDF). Therefore, in this study, the prediction of the engine performance and exhaust emissions is carried out for five different neural networks to define how the inputs affect the outputs using the biodiesel blends produced from waste frying palm ...
متن کاملCharacteristics of fish oil biodiesel with the impact of diesel fuel addition on a CI engine
The present study focuses on the optimization in the use of non-petroleum fuel derived from waste fish oil fuels, as a replacement for petroleum diesel fuel for compression ignition engine. The study comprises of comparison between results of fish oil biodiesel-diesel blends on a compression ignition engine. Fuel properties such as viscosity, density, heat value of fuel, cetane number and a fla...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings Of The Institution Of Mechanical Engineers, Part E: Journal Of Process Mechanical Engineering
سال: 2023
ISSN: ['0954-4089', '2041-3009']
DOI: https://doi.org/10.1177/09544089231190221