Impact of train-induced vibration on railway cable-stayed bridges fatigue evaluation

Impact of Cross-Tie Properties on the Modal Behavior of Cable Networks on Cable-Stayed Bridges

Dynamic behaviour of cable networks is highly dependent on the installation location, stiffness, and damping of cross-ties. Thus, these are the important design parameters for a cable network. While the effects of the former two on the network response have been investigated to some extent in the past, the impact of cross-tie damping has rarely been addressed. To comprehend our knowledge of mec...

Motion Based Design of Cable-Stayed Bridges

Recent increases in limit spans of cable-stayed bridges have highlighted the need for new concepts in analysis and design. The increased flexibility requires more theoretical studies on non-linear behavior and on dynamic analysis. Design also is more oriented to a performance-based approach: motion control is more important than strength analysis. My main objective is to define what are the par...

Construction and Design of Cable-Stayed Bridges

Non-Linear Analysis of Cable Stayed Bridges

he concept of cable-stayed bridges dates back to the seventeenth century. Due to their aesthetic appearance, efficient utilization of material, and availability of new construction technologies, cable-stayed bridges have gained much popularity in the last few decades. After successful construction of the Sutong Bridge, a number of bridges of this type have been proposed and are under constructi...

Cable-Stayed Bridges: A Case Study for Vibration-Based Cable Tension Estimation

A cable-stayed bridge recently constructed by the Ohio Department of Transportation incorporates measures put forth by a Federal Highway Administration study to mitigate stay motion. In following recent trends, the stays at this bridge are built without the use of grout for the purposes of inspection and, if necessary, replacement. Several experiments were performed to determine the viability o...