Immobilization of TiO2 Photocatalyst Particles on Stainless Steel Substrates by Electrolytically Deposited Pd and Cu
نویسندگان
چکیده
منابع مشابه
Characterization of SiO2-TiO2 Coatings on 316l Stainless Steel Substrates
This paper reports nano-structured SiO2-TiO2 coatings using the sol-gel technique on 316L steel substrates. Nanoindentation, surface analysis and corrosion resistance tests were performed on different samples. The nanomechanical tests allowed to compare uncoated steel samples (Eavg = 193.24 GPa and mean hardness of 2.63 GPa and coated steel samples (Eavg = 287.38 GPa and mean hardness of 5.74 G...
متن کاملPHYSIOCHEMICAL PROPERTIES OF TiO2 NANOPARTICLE THIN FILMS DEPOSITED ON STAINLESS STEEL
M. Basiaga, W. Walke, D. Nakonieczny, A. Hyla Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland The purpose of this study was to evaluate the usefulness of TiO2 layer to improve hemocompatibility of 316LVM stainless steel. The TiO2 layers studied in this work were deposited from TiCl4 and H2O in a low-pressure Atomic Layer Deposition (ALD) reactor taking into ...
متن کاملHydrogen permeability of Pd-Ag membrane modules with porous stainless steel substrates
Palladium-based membranes are attractive for their nearly perfect permselectivity to hydrogen. Membrane modules, consisting of a membrane foil, porous stainless steel substrate, test frame and flange were assembled and tested in an electrically heated vessel. Instantaneous hydrogen permeation flux was measured. Influences of operation conditions on the membrane performance were examined. Micros...
متن کاملInfluence of nitrogen ion implantation on the nanostructure and corrosivity of Ni/stainless steel substrates
Ion implantation is a surface modification technology to produce new material on the surface by impingement of high energy ions from the ion accelerator. In this work, AISI 304 stainless steels were coated with 90 nm Ni film by electron beam deposition and implanted by a flow of 5×1017 N cm−2 at 400 K temperature with different implantation energies of 10, 20, 30 and 40 keV. The prepared sample...
متن کاملEnhanced bone formation on newly fabricated Cu-bearing stainless steel
313 ©2014 Society for Biomaterials
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2006
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.114.42