<i>In-Situ</i> Study on Deformation Behavior of ZK60 Alloy Processed by Cyclic Extrusion and Compression
نویسندگان
چکیده
منابع مشابه
Effects of Texture and Grain Size on the Yield Strength of ZK61 Alloy Rods Processed by Cyclic Extrusion and Compression
The ZK61 alloy rods with different grain sizes and crystallographic texture were successfully fabricated by cyclic extrusion and compression (CEC). Their room-temperature tension & compression yield strength displayed a significant dependence on grain size and texture, essentially attributed to {10-12} twinning. The texture variations were characterized by the angle θ between the c-axis of ...
متن کاملWear Behavior and Microstructure of Mg-Sn Alloy Processed by Equal Channel Angular Extrusion
Mg-5wt.% Sn alloy is often used in portable electronic devices and automobiles. In this study, mechanical properties of Mg-5wt.% Sn alloy processed by Equal Channel Angular Extrusion (ECAE) were characterized. More precisely, its hardness and wear behavior were measured using Vickers hardness test and a pin-on-disc wear test. The microstructures of ECAE-processed Mg-Sn alloys were investigated ...
متن کاملStudy on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion
In the present work, an experimental study was done to prepare Acrylonitrile-Butadiene-Styrene matrix composite reinforced by Nano-silica particles. The hot extrusion method was utilized here to fabricate the composite specimens used for flexural and compression tests. In order to identify the effect of SiO2 content and extrusion temperature, 12 experiments have been carried out and ...
متن کاملCorrosion Behavior of Al-2wt%Cu Alloy Processed By Accumulative Roll Bonding (ARB) Process
Accumulative roll bonding (ARB) imposes severe plastic strain on materials without changing the specimen dimensions. ARB process is mostly appropriate for practical applications because it can be performed readily by the conventional rolling process. An Al-2wt%Cu alloy was subjected to ARB process up to a strain of 4.8. Stacking of materials and conventional roll-bonding are repeated in the pro...
متن کاملEffect of Deformation-Induced Defects on the Microstructure and Pitting Corrosion Behavior of Al-Ag Alloy
In this study, a wide range of combined ageing treatments and cold work deformations in the Al 4.2 wt% Ag alloy matrix were proposed, aiming to investigate the effect of defects such as precipitates (Ag2Al plates) and dislocations on the mechanical and electrochemical behavior of Al–4.2 wt% Ag alloys. Further reductions of thickness from 10 to 60%, decreases the mean size of Ag2...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2014
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.mc201405