<i>In situ</i> amination of anion conducting solid polymer electrolyte membranes
نویسندگان
چکیده
In situ amination casting process for AEM fabrication.
منابع مشابه
Recent developments in high-temperature proton conducting polymer electrolyte membranes
Progress in the area of proton conducting polymer electrolyte membranes is intimately linked with the development of polymer electrolyte membrane fuel cells, and is today largely driven by the insufficient properties of humidified Nafion membranes at temperatures above 100 8C. Recent developments in the field include new ionomers and hybrid membranes containing inorganic nanoparticles to contro...
متن کاملSolid polymer electrolyte membranes for fuel cell applications—a review
Fuel cells represent a clean alternative to current technologies for utilizing hydrocarbon fuel resources. Polymer electrolyte membrane fuel cells (PEMFCs) have acquired due importance as they are best suited for applications where a quick start up is required such as in automobiles. The prime requirements of fuel cell membranes are high proton conductivity, low methanol/water permeability, goo...
متن کاملPolymer Electrolyte Membranes for Water Photo-Electrolysis
Water-fed photo-electrolysis cells equipped with perfluorosulfonic acid (Nafion® 115) and quaternary ammonium-based (Fumatech® FAA3) ion exchange membranes as separator for hydrogen and oxygen evolution reactions were investigated. Protonic or anionic ionomer dispersions were deposited on the electrodes to extend the interface with the electrolyte. The photo-anode consisted of a large band-gap ...
متن کاملTrends in Polymer Electrolyte Membranes for PEMFC
In this chapter research trends followed by various scientific groups for the development of polymeric membranes have been described and reviewed. Most notably, the developments made at Ballard Advanced Materials (BAM) and some of their results are discussed. In general three different approaches have been followed worldwide by various research groups for the development and conception of alter...
متن کاملPES/Quaternized-PES Blend Anion Exchange Membranes: Investigation of Polymer Compatibility and Properties of the Blend
Polyethersulfone (PES)-based anion exchange blend membranes were prepared from quaternized-PES (Q-PES) and N-Methyl-2-pyrrolidone (NMP) casting solutions with water as coagulant via non-solvent induced phase inversion. The compatibility of the blend system was investigated through thermodynamic studies while membrane formation was determined using the cloud point techni...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials advances
سال: 2023
ISSN: ['2633-5409']
DOI: https://doi.org/10.1039/d3ma00115f