<I>High Temperature Strengthening Mechanisms in the Alloy Platinum-5% Rhodium DPH</I>
نویسندگان
چکیده
منابع مشابه
Analysis of Strengthening Mechanisms in an Artificially Aged Ultrafine Grain 6061 Aluminum Alloy
The current study adopted a quantitative approach to investigating the mechanical properties, and their relationship to the microstructural features, of precipitation-strengthened 6061 aluminum alloy processed through accumulative roll bonding (ARB) and aging heat treatment. To serve this purpose, the contributions of different strengthening mechanisms including grain refinement, precipitation...
متن کاملStrengthening Mechanisms in the Aged 2024 and 7075 Aluminium Alloys
Aluminum 2024 and 7075 alloys which are widely used in aerospace and marine applications were chosen to investigate their strengthening mechanisms. Using differential thermal analysis (DIA), metallography and tension tests, the best solutionizing conditions were determined to be 500±5°C and 2 hours for 2024 and 480?±5°C and 1 hour for 7075 alloy. Aging was performed in the range of 100 to 200°C...
متن کاملErratum: Thermal Expansion of Platinum and Platinum-Rhodium Alloys
Erratum: Equation (22) contains an error. It should read 100 ɛ(t, 0 °C) = 8.79 × 10 −4 t + 0.805 × 10 −7 t 2. (22) Also, the data presented in Table 12 under the column Day and Sosman Eq. (22) should be evaluated by using the corrected Eq. (22) above.
متن کاملVapor Pressures of Platinum , Iridium , and Rhodium
Systematic measurements of the vapor pressure of iridium and rhodium over a wide temperatme range have not been published previously. A summary of previous estimates or observations of their normal boiling points and values of their heats of sublimation, f:..H ~ (298), is given in table l. The vapor pressure of platinum was calculated by Langmuir and .Mackay from measurements of the rate of sub...
متن کاملPlatinum and Rhodium Silicide–Germanide Optoelectronics
Since the introduction of SiO2/Si devices in the 1960s, the only basic change in the design of a MOSFET has been in the gate length. The channel thickness has fundamentally remained unchanged, as the inversion layer in a silicon MOSFET is still about 10 nm thick. Bipolar transistor base widths have been of sub-micron dimensions all this time. It is time for a new property to be exploited in con...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Platinum Metals Review
سال: 2011
ISSN: 0032-1400,1471-0676
DOI: 10.1595/147106711x591971