Identifying Optimal FSW Process Parameters for 2024 Al Alloy Butt Joints
نویسندگان
چکیده
منابع مشابه
Fatigue Strength Estimation Based on Local Mechanical Properties for Aluminum Alloy FSW Joints
Overall fatigue strengths and hardness distributions of the aluminum alloy similar and dissimilar friction stir welding (FSW) joints were determined. The local fatigue strengths as well as local tensile strengths were also obtained by using small round bar specimens extracted from specific locations, such as the stir zone, heat affected zone, and base metal. It was found from the results that f...
متن کاملEffects of Anodizing Parameters in Tartaric-Sulphuric Acid on Coating Thickness and Corrosion Resistance of Al 2024 T3 Alloy
2024 T3 is one of aluminium alloys which are widely used in the aircraft structures. Anodizing of alluminium alloy in tartaric-sulphuric acid (TSA) electrolyte is developed to obtain more environmentally-friendly process and to produce anodize layer with better corrosion resistance. In this research work, the influences of anodizing parameters of Al 2024 T3 in TSA on the thickness, weight and c...
متن کاملEffect of welding on impact toughness of butt-joints in a titanium alloy
Impact toughness of a gas tungsten arc welded Ti /6Al /4V alloy butt-joint was evaluated at room temperature using standard Charpy V-notch specimens. The Charpy specimens were prepared with notch roots located either in the parent metal, in the heataffected zone (HAZ), or in the weld metal. Optical metallography and Vickers microhardness test showed that the weld metal has the coarsest grains a...
متن کاملLaser Direct Metal Deposition of 2024 Al Alloy: Trace Geometry Prediction via Machine Learning
Laser direct metal deposition is an advanced additive manufacturing technology suitably applicable in maintenance, repair, and overhaul of high-cost products, allowing for minimal distortion of the workpiece, reduced heat affected zones, and superior surface quality. Special interest is growing for the repair and coating of 2024 aluminum alloy parts, extensively utilized for a wide range of app...
متن کاملInfluence of Process Parameters on the Mechanical Behavior of an Ultrafine-Grained Al Alloy
Aluminum alloys with nanocrystalline (NC) and ultrafine grain (UFG) size are of interest because of their strengths that are typically 30 pct greater than conventionally processed alloys of the same composition. In this study, UFG AA 5083 plate was prepared by quasi-isostatic (QI) forging of cryomilled powder, and the microstructure and mechanical behavior was investigated and compared with the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Science and Technology Research Journal
سال: 2019
ISSN: 2080-4075,2299-8624
DOI: 10.12913/22998624/110740