Identification of polymers in waste tyre reinforcing fibre by thermal analysis and pyrolysis
نویسندگان
چکیده
منابع مشابه
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولCatalytic Pyrolysis of Waste Tyre Rubber into Hydrocarbons Via Base Catalysts
The waste tyres represent a source of energy and valuable hydrocarbon products. Waste tyres were pyrolysed catalytically in a batch reactor under atmospheric pressure. The effects of basic catalysts (MgO and CaCO3) were studied on the pyrolysis products. The distribution ratio of gas, liquid and char with MgO and CaCO3 were 24.4:39.8:35.8 wt % and 32.5:32.2:35.2 wt % r...
متن کاملthe stady and analysis of rice agroclimatology in lenjan
the west of esfahan province, iran, is one of the most important agricultural areas throughout the country due to the climate variability and life-giving water of zayanderood river. rice is one of the major and economic crops in this area. the most important climatic elements in agricultural activities which should be considered include temperature, relative humidity, precipitation and wind. so...
15 صفحه اولCoal and plastic waste co - pyrolysis by thermal analysis - mass spectrometry
Simultaneous thermogravimetry-mass spectrometry studies of a pyrolytic decomposition of mixtures of different plastic wastes/coking coal were carried out. The investigation was performed at temperatures up to 1000oC in a helium atmosphere under dynamic conditions at a heating rate of 25 oC/min. Five thermoplastics, commonly found in municipal wastes: low density polyethylene (LDPE), high densit...
متن کاملRecycling of polymers by pyrolysis
The pyrolysis of plastic waste, scrap tires and other polymeric materials in a fluidized bed has been carried out based on a scale up program (laboratory plants 70 g/h, 500 g/h, 3000 g/h, and pilot plant 20-50 kg/h). The fluidized bed shows short residence times and high heat and mass transfers, and is heated indirectly up to 600 800 OC. In the case of poly(methylmethacry1ate) (PMMA) or polysty...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Analytical and Applied Pyrolysis
سال: 2015
ISSN: 0165-2370
DOI: 10.1016/j.jaap.2014.11.005