Identification of Hydrogen Trapping Sites in a Strained Ferritic-martensitic Dual Phase Steel
نویسندگان
چکیده
منابع مشابه
Theory for Hydrogen Desorption in Ferritic Steel
After a concise review of the analytical models available for the interpretation of thermal desorption rates for hydrogen effusion from steel, a numerical method that incorporates the essence of local equilibrium and detrapping kinetics has been implemented to account for the real complexity of practical experiments. For example, the model permits the treatment of multiple kinds of traps, uses ...
متن کاملhydrogen embrittlement on 2.25cr-1mo steel with ferritic-bainitic & martensitic microstructures
in this paper, effect of hydrogen diffusion on 2.25cr-1mo steel with ferritic-bainitic and martensitic microstructure has been investigated. hydrogen embrittlement of this steel was investigated by doing experimental such as delayed fracture and slow strain rate tests. result of this research was showed that the steel with martensitic microstructure strongly affected by hydrogen diffusion and ...
متن کاملInvestigation on the Enhanced Oxidation of Ferritic/Martensitic Steel P92 in Pure Steam
Oxidation of ferritic/martensitic steel P92 was investigated in pure oxygen and in pure steam at 600-800 °C by thermogravimetric analysis (TGA), optical microscopy (OM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The results showed that the oxidation of P92 was significantly enhanced and multilayer scale with an outer iron oxides layer formed in pure steam. At 700 °C, the ...
متن کاملHot tensile properties of 9Cr-2WVTa reduced-activation ferritic/martensitic steel
Reduced-activation ferritic/martensitic steels have been developed by replacing molybdenum by tungsten and niobium by tantalum in commercial elevated-temperature Cr–Mo steels to reduce half-life of radioactive isotopes. The objective of this study was to investigate tensile properties of a reduced-activation ferritic/martensitic steel (9Cr-2WVTa) in normalized-tempered (NT) and quenched-tempere...
متن کاملStrong Ferritic – Steel Welds
There are many steels which are stronger than 2000 MPa, with toughness values exceeding 100 MPa m and which have been in commercial service for many decades. Examples include the marageing alloys and carbide–free bainitic steels. By contrast, welding consumables with a proof strength in excess of 1000 MPa are few and far between. This is because whereas wrought steels can be thermomechanically ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 2018
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane.tetsu-2017-030