Identification of delamination position in cross-ply laminated composite beams using S0 Lamb mode

Locating Delamination in Composite Laminated Beams Using the Zero-Order Mode of Lamb Waves

Multiscale Analysis of Transverse Cracking in Cross-Ply Laminated Beams Using the Layerwise Theory

A finite element model based on the layerwise theory is developed for the analysis of transverse cracking in cross-ply laminated beams. The numerical model is developed using the layerwise theory of Reddy, and the von Kármán type nonlinear strain field is adopted to accommodate the moderately large rotations of the beam. The finite element beam model is verified by comparing the present numeric...

Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads

Due to the mismatch of mechanical properties in composite laminates, propagation of delami-nation is considered as a severe damage mechanism in beams with various lay-up configurations. Delamination can be generated due to matrix cracking propagation or it can also be initiated due to the manufacturing process before using composite beams. Using a micromechanics model, this study is aimed to in...

Lamb Wave Propagation in Laminated Composite Structures

| Damage detection using guided Lamb waves is an important tool in Structural health Monitoring. In this paper, we outline a method of obtaining Lamb wave modes in composite structures using two dimensional Spectral Finite Elements. Using this approach, Lamb wave dispersion curves are obtained for laminated composite structures with different fibre orientation. These propagating Lamb wave modes...

Analysis of post-buckling and delamination in laminated composite St. Venant–Kirchhoff beams using CZM and layer-wise TSNDT

A layer-wise third order shear and normal deformable plate/shell theory (TSNDT) incorporating a cohesive zone model (CZM) is used to study the initiation and growth of delamination in straight and curved laminated beams. Upon satisfaction of the delamination criteria at a point on the interface between two layers, displacements there of two abutting points on the interface between the two layer...