Identification of Chromium-Depleted Area around Chromium Nitride Precipitates in Heat-affected Zone of Lean-Duplex Stainless Steel and <i>In-situ</i> Observation of Preferential Dissolution by EC-AFM

نویسندگان

چکیده

A Gleeble thermo-mechanical simulator was used to simulate the welds of duplex stainless steel S32101. micro-precipitate chromium-nitride and its surroundings in simulated analyzed detail by SEM/AES EC-AFM. The AES analysis revealed that a chromium-depleted area is present γ phase near chromium-nitrides precipitated at α/γ grain boundary. EC-AFM observation preferentially dissolves from area.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Heat Affected Zone in Surfacing Chromium Ledeburitic Steel

Repair welding is not used enough in the industry 1 . One of the reasons for this lies in the insufficient and unrealiable knowledge in many segments of this area. A very important part is having appropriate knowledge of metallurgical processes in heating of the base material 2-4 . Unsuitable heating deteriorates the microstructure as it reduces toughness and fracture behaviour of the weld 5 . ...

متن کامل

ec adoption and critical success factors of ec in smes in iran

تجارت الکترونیکی شیوه اجرای مسئولیتها، تقابل با مشتریان و امور معمول عملیاتی در شرکتها را تغییر داده است. تجارت الکترونیکی در عمل تنها خرید و فروش کالاها را از طریق ابزار الکترونیک نمی باشد، بلکه تمام فعالیتهای لازم جهت انجام فرایند فروش را نیز در بر میگیرد. در اواخر دهه 1990 بسیاری از شرکتها فعالیتهای خود را به منظور دستیابی به مشتریان جدید و یا ارائه فرصتهای جدید به مشتریان موجود گسترش دادند...

The Influence of Heat-Input on Structural and Mechanical Properties of 2205 Duplex Stainless Steel

The influence of heat-input and pre-heat treatment on the structure, mechanical and corrosion behaviors of 2205 duplex stainless steel joint by means of GMAW process was the goal of this study. In this regards, the welding process was done using different heat input in the range of 0.6 to 1.4 kJ/mm and different pre-heating treatments in the range of 25 to 100 oC. The microstructural properties...

متن کامل

study of cohesive devices in the textbook of english for the students of apsychology by rastegarpour

this study investigates the cohesive devices used in the textbook of english for the students of psychology. the research questions and hypotheses in the present study are based on what frequency and distribution of grammatical and lexical cohesive devices are. then, to answer the questions all grammatical and lexical cohesive devices in reading comprehension passages from 6 units of 21units th...

The Influence of Heat-Input on Structural and Mechanical Properties of 2205 Duplex Stainless Steel

The influence of heat-input and pre-heat treatment on the structure, mechanical and corrosion behaviors of 2205 duplex stainless steel joint by means of GMAW process was the goal of this study. In this regards, the welding process was done using different heat input in the range of 0.6 to 1.4 kJ/mm and different pre-heating treatments in the range of 25 to 100 oC. The microstructural properties...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Isij International

سال: 2022

ISSN: ['0915-1559', '1347-5460']

DOI: https://doi.org/10.2355/isijinternational.isijint-2021-462