Identification of Cavitation by Noise

نویسندگان

چکیده

The identification of cavitation is very important in technical practice for operational and especially economic reasons. article deals with the use another way to measure noise during cavitation. current approach measuring an intensity probe used identification, but it does not immediately address position source a given frequency range. Measurement by acoustic camera entirely common practice, allows determine location To test camera, authors focused on cavitating flow hydraulic circuit three previously tested nozzles. Noise was measured these nozzles using two microphones. results were evaluated statistical methods compared measurements camera. aim point out advantages this accurate area problem. Research background: work issue its circuit. For research, variant chosen. However, measurement brings problems that are only revealed through more sophisticated measurements. Purpose article: purpose other possibilities modern technologies subsequently verify results. Methods: Metody: A suitably located probe. measurement. methodology benefits described. Findings & Value added: commonly has proved be insufficient, as possible distinguish sources case complex When there they detected according required frequencies different places than expected. points specific spectrum selected elements.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Recent Observations on Cavitation and Cavitation Noise

This paper is primarily concerned with the acoustics of traveling bubble cavitation around foils or headforms. We begin with observations of individual bubbles and the acoustic signals they emit, our purpose being to identify areas of research which would enhance our tlriderstaridirig of the history of individual bubbles. Then we present some riumerical integrations of the Rayleigh/Plesset equa...

متن کامل

Cavitation Bubble Dynamics and Noise Production

This paper presents a summary of some recent observations of the interaction between individual traveling cavitation bubbles and the nearly solid surface. These reveal a complex micro-fluid-mechanics associated withThe interaction of the bubble with the boundary layer, the surface and the large pressure gradients exterior to the boundary layer which normally occur in the vicinity of a minimum p...

متن کامل

Identification of static distortion by noise measurement

ELECT Many active devices exhibit gross nonlinearity, which is traditionally mitigated using negative feedback. In those cases where negative feedback is not desired, compensation for the distortion can be carried out at the postprocessing stage by inverting the transfer function of the device. A new technique is demonstrated where the inherent noise in the system is exploited to estimate the r...

متن کامل

The Effect of Water Quality Characteristics on Cavitation Noise

This study investigated the effects of seawater on cavitation noise using a water jet test, a two-dimensional wing test, and a three-dimensional wing test. A model propeller cavitation test was conducted in a cavitation tunnel using seawater, in order to determine the effects of propeller cavitation more precisely. In the cavitation tests, measured propeller performance for both cavitation nois...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: MATEC web of conferences

سال: 2022

ISSN: ['2261-236X', '2274-7214']

DOI: https://doi.org/10.1051/matecconf/202236902010