Hyperbranched polyester polyol plasticized tapioca starch/low density polyethylene blends
نویسندگان
چکیده
منابع مشابه
Tensile and impact behavior of polypropylene/low density polyethylene blends
Blends of polypropylene (PP) and low-density polyethylene (LDPE) may contribute to make recycling more economically attractive. The aim of this work was to make PP/LDPE blends (0/100, 25/75, 50/50, 75/25 and 100/0 w/w) via injection molding carried out under various injection temperatures and to evaluate their tensile and impact properties. The blends yielded tensile stress–strain curves very d...
متن کاملPreparation of High Density Polyethylene/Waste Polyurethane Blends Compatibilized with Polyethylene-Graft-Maleic Anhydride by Radiation
Polyurethane (PU) is a very popular polymer that is used in a variety of applications due to its good mechanical, thermal, and chemical properties. However, PU recycling has received significant attention due to environmental issues. In this study, we developed a recycling method for waste PU that utilizes the radiation grafting technique. Grafting of waste PU was carried out using a radiation ...
متن کاملMelt Rheology of Poly(Lactic Acid)/Low Density Polyethylene Polymer Blends
In this work, rheological properties of poly(lactic acid) (PLA), low density polyethylene (LDPE) polymer blends were investigated in the molten state. The experiments were carried on a capillary rheometer. The effect of shear stress, temperature and blending ratio on the flow activation energy at a constant shear stress and melt viscosity of the blends are described. The results showed that the...
متن کاملA novel wood flour-filled composite based on microfibrillar high-density polyethylene (HDPE)/Nylon-6 blends.
A novel wood flour (WF)-filled composite based on the microfibrillar high-density polyethylene (HDPE) and Nylon-6 co-blend, in which both in situ formed Nylon-6 microfibrils and WF acted as reinforcing elements, was successfully developed using a two-step extrusion method. At the 30wt.% WF loading level, WF-filled composite based on the microfibrillized HDPE/Nylon-6 blend exhibited higher stren...
متن کاملAn investigation on chloroprene-compatibilized acrylonitrile butadiene rubber/high density polyethylene blends
Blends of acrylonitrile butadiene rubber/high density polyethylene (NBR/HDPE) compatibilized by Chloroprene rubber (CR) were prepared. A fixed quantity of industrial waste such as marble waste (MW, 40 phr) was also included. The effect of the blend ratio and CR on cure characteristics, mechanical and swelling properties of MW-filled NBR/HDPE blends was investigated. The results showed that the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polímeros
سال: 2017
ISSN: 0104-1428
DOI: 10.1590/0104-1428.04816