Hydroxyapatite Synthesis and Covering of Titanium Surfaces by Dip-Coating Method
نویسندگان
چکیده
HIGHLIGHTS Coating method suggest an easy and viable alternative to produce HAp films. Dip-coating was effective a film on titanium cylinders. Cell viability over the HAp-modified cylinders not altered. present adequate control of deposition thin films hydroxyapatite.
منابع مشابه
Selective dip-coating of chemically micropatterned surfaces
We characterize the selective deposition of liquid microstructures on chemically heterogeneous surfaces by means of dip coating processes. The maximum deposited film thickness depends critically on the speed of withdrawal as well as the pattern size, geometry, and angular orientation. For vertically oriented hydrophilic strips, we derive a hydrodynamic scaling relation for the deposited film th...
متن کاملConformal dip-coating of patterned surfaces
Capillarity-driven self-assembly of small chips onto planar target substrates is a promising alternative to robotic pick-and-place assembly. It critically relies on the selective deposition of thin fluid films on patterned binding sites, which is anyway normally non-conformal. We found that the addition of a thin wetting sidewall, surrounding the entire site perimeter, enables the conformal flu...
متن کاملHydroxyapatite Coating on Silicon Nitride Surfaces Using the Biomimetic Method
Silicon nitride based ceramics are promising candidates for biomedical applications due to their chemical and dimensional stability associated to suitable mechanical strength and relatively high fracture toughness. However, the bioinert characteristics of these ceramics limit their application to situations where the formation of chemical bonds between the material and the tissue are not essent...
متن کاملSynthesis and Characterization of Hydroxyapatite Layer on Cobalt Alloys through Dip Coating Method as a Prosthetic Bone Implant Candidate
This research aims to determine the effect of dip coating process parameter, which are the concentration of the suspension, withdrawal speed and sintering temperature on the crystallinity, surface morphology, shear strength and the thickness of hydroxyapatite (HA) coating on cobalt alloys substrate as a prosthetic bone implant material candidate. The coating is done at 3 different concentration...
متن کاملHydroxyapatite film coating by thermally induced liquid-phase deposition method for titanium implants.
Thermally induced liquid-phase deposition method was employed to produce a thin hydroxyapatite (HA) film on a titanium substrate in a metastable calcium phosphate solution. Titanium foil of 100x10x0.02 mm3 was used as a substrate. Prior to HA coating, the substrate was immersed in 5 M NaOH solution at 60 degrees C for 24 hours. Substrate temperature was kept constant at 60 degrees C for 0.5-3 h...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Brazilian Archives of Biology and Technology
سال: 2021
ISSN: ['1678-4324', '1516-8913']
DOI: https://doi.org/10.1590/1678-4324-2021200344