Hydroxyapatite coating by electrophoretic deposition at dynamic voltage
نویسندگان
چکیده
منابع مشابه
Hydroxyapatite coating by electrophoretic deposition at dynamic voltage.
The aim of this study was to evaluate hydroxyapatite (HA) coatings produced by dynamic voltage during electrophoretic deposition (EPD). Dynamic voltages from 0 to 200 V were incrementally applied in three interims. The as-deposited coating was sintered at 800 degrees C and its properties evaluated. Structure and phase analyses of both as-deposited and sintered coatings were evaluated by scannin...
متن کاملImproved bio-physical performance of hydroxyapatite coatings obtained by electrophoretic deposition at dynamic voltage
This study investigates the effects of the electrophoretic deposition process (EPD) at dynamic voltage on the physical and biological characteristics of hydroxyapatite (HA) coatings. HA powder is synthesized and used for preparation of HA/ethanol suspension which is subsequently characterized by X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), Fourier transform infrared spectrosco...
متن کاملElectrophoretic Deposition of Hydroxyapatite
The purpose of this study was to investigate the deposition of the hydroxyapatite (HA) coating via the electrophoresis procedure. The HA deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. Methanol was found to be the best deposition media. Among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pr...
متن کاملelectrophoretic deposition of hydroxyapatite
the purpose of this study was to investigate the deposition of the hydroxyapatite (ha) coating via the electrophoresis procedure. the ha deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. methanol was found to be the best deposition media. among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pressur...
متن کاملNano-Hydroxyapatite Coated Acetabular Cup Implant by Electrophoretic Deposition
A nanostructural hydroxyapatite (HA) coating was deposited to the porous Ti6Al4V acetabular cup implants using a room temperature electrophoretic deposition (EPD) process in order to achieve the improved bonding strength between the implants and cells, fast healing, good corrosion resistance and long-term stability after implantation. The micropores created in the coating will improve the bioac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Dental Materials Journal
سال: 2008
ISSN: 1881-1361,0287-4547
DOI: 10.4012/dmj.27.666