Hydrogenation Properties of Partially Remelted Mg-Ni Alloys

Ground-state properties of ordered, partially ordered, and random Cu-Au and Ni-Pt alloys.

Synthesis and mechanical properties of nanostructured Mg-Al-Nd alloys

In this work, nanostructured Mg-Al-Nd alloys were successfully fabricated using mechanical alloying method. Phase structures of the milled powders and the extruded rods were examined using X-ray diffraction (XRD) and the microstructures were observed using a transmission electron microscope (TEM). The element distributions were also examined by an energy dispersive spectroscopy (EDS) system. Th...

Structure and properties of Al–Mg mechanical alloys

Mechanically alloys in the Al–Mg binary system in the range of 5–50 at.% Mg were produced for prospective use as metallic additives for propellants and explosives. Structure and composition of the alloys were characterized by x-ray diffraction microscopy (XRD) and scanning electron microscopy. The mechanical alloys consisted of a supersaturated solid solution of Mg in the aluminum phase, phase ...

CREEP AGE FORMING OF Al-Zn-Mg ALLOYS WITH OPTIMIZATION OF MECHANICALl PROPERTIES

Creep age forming (CAF) is one of the novel methods in aerospace industry that has been used to manufacture components of panels with improved mechanical properties and reduced fabrication cost. CAF is a combined age-hardening and stress-relaxation that are responsible for strengthening and forming, respectively. This paper deals with the experimental investigations of mechanical and springback...

Quasicrystal-reinforced Mg alloys

The formation of the icosahedral phase (I-phase) as a secondary solidification phase in Mg-Zn-Y and Mg-Zn-Al base systems provides useful advantages in designing high performance wrought magnesium alloys. The strengthening in two-phase composites (I-phase + α-Mg) can be explained by dispersion hardening due to the presence of I-phase particles and by the strong bonding property at the I-phase/m...