Hydrogen Separation Using LaNi5Films Deposited on Polymer Membranes
نویسندگان
چکیده
منابع مشابه
Development of Palladium-Alloy Membranes for Hydrogen Separation and Purification
This paper summarizes R&D activities and progress at NORAM Engineering and the University of British Columbia (UBC) on preparation and testing of thin palladium-based membranes and their applications. Most of these activities were carried out internally at NORAM, some jointly with UBC and their spin-off company, Membrane Reactor Technology (MRT) through a wide range of projects. Key results out...
متن کاملUltramicroporous Membranes for Hydrogen Separation
Fuel cell systems offer excellent efficiencies when compared to internal combustion engines, which result in reduced fuel consumption and greenhouse gas emissions. One of the areas requiring research for the success of fuel cell technology is the H2 fuel purification to reduce CO, which is a poison to fuel cells. Molecular sieve silica (MSS) membranes have a potential application in this area. ...
متن کاملDense Ceramic Membranes for Hydrogen Separation
In the 1980s and 1990s, the development of oxygen ion conductors for solid electrolytes, as well as mixed oxygen–electron conductors as electrodes for solid oxide fuel cells, brought scientists to envision a possibility of mixed-conducting oxygenpermeable ceramic membranes. Today this field is well established, and ceramic membranes are close to implementation in processes for oxygen extraction...
متن کاملDense Ceramic Membranes for Hydrogen Separation
Novel cermet (i.e., ceramic-metal composite) membranes have been developed for separating hydrogen from product streams that are generated during coal gasification, methane partial oxidation, and watergas shift reactions. The hydrogen permeation rate in the temperature range of 600-900°C has been measured for three classes (ANL-1, -2, and -3) of cermet membranes. ANL-3 membranes provided the hi...
متن کاملMicrofabricated Palladium-based Membranes for Hydrogen Separation
An innovative process for the microfabrication of Pd-based membranes (Pd and Pd-Ag) on a <110> silicon wafer is presented. Pd-Ag alloy films containing 23wt% Ag are prepared by a dual-sputtering from pure Pd and Ag targets. In the first step, deep grooves are KOH etched in one side of a <110> oriented silicon wafer, leaving membranes with a thickness of ca. 50 μm. After Pd alloy deposition on t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of the Chemical Society of Japan
سال: 1988
ISSN: 0009-2673,1348-0634
DOI: 10.1246/bcsj.61.521