Hydrogen production via water-gas shift reaction over gold supported on Ni-based layered double hydroxides

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Application of Pd-Substituted Ni-Al Layered Double Hydroxides for the Hydrogen Evolution Reaction

Clean production of hydrogen from electrochemical water splitting has been known as a green method of fuel production. In this work, electrocatalytic hydrogen evolution reaction (HER) was investigated at new prepared layered double hydroxides (LDH) in acidic solution. NiAl/carbon black (CB) LDH was monitored using x-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, scannin...

متن کامل

Dynamic Model For Production of Biohydrogen Via Water- Gas Shift Reaction (RESEARCH NOTE)

In design of anaerobic bioreactor, rate equation is commonly used. Mathematical model was developed at steady state condition, to project concentration of gaseous substrate and product in biological oxidation of carbon monoxide with water to produce hydrogen and carbon dioxide. The concept of bioconversion was based on transport of CO from gas phase to liquid phase, as the CO consumption was in...

متن کامل

Production of fuel - cell grade hydrogen by sorption enhanced water gas shift reaction using Pd / Ni - Co catalyst

It has been demonstrated both thermodynamically and experimentally that fuel-cell grade hydrogen can be produced by a one-step sorption enhanced water gas shift (SEWGS) process at about 500 oC, where the water gas shift (WGS) catalyst and the CO2 sorbent are highly integrated. A synthetic CaO-based mixed oxide sorbent was also assessed, which showed a good CO2 capture capacity and stability in ...

متن کامل

Low-temperature water-gas shift reaction over Cu- and Ni-loaded cerium oxide catalysts

In this paper we report on the activity of Cuand Ni-containing cerium oxide catalysts for low-temperature water-gas shift (WGS). Bulk catalysts were prepared in nanocrystalline form by the urea co-precipitation–gelation method. Lanthanum dopant (10 at.%) was used as a structural stabilizer of ceria, while the content of Cu or Ni was in the range of 5–15 at.% (2–8 wt.%). At low metal loadings, C...

متن کامل

Hydrogen-Etched TiO2−x as Efficient Support of Gold Catalysts for Water–Gas Shift Reaction

Hydrogen-etching technology was used to prepare TiO2−x nanoribbons with abundant stable surface oxygen vacancies. Compared with traditional Au-TiO2, gold supported on hydrogen-etched TiO2−x nanoribbons had been proven to be efficient and stable water–gas shift (WGS) catalysts. The disorder layer and abundant stable surface oxygen vacancies of hydrogen-etched TiO2−x nanoribbons lead to higher mi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: International Journal of Hydrogen Energy

سال: 2021

ISSN: 0360-3199

DOI: 10.1016/j.ijhydene.2020.09.214