Hydrogen Isotopes Plasma-Driven Permeation through Tungsten Coated Reduced Activation Ferritic Steel F82H
نویسندگان
چکیده
منابع مشابه
Fatigue Life Evaluation of TIG-weld of Reduced Activation Ferritic/Martensitic Steel F82H by Small Specimen Test Technique
Evaluation of the low cycle fatigue life by the small specimen test technique (SSTT) and some other properties (metallographical structure and Vickers hardness) for the TIG (tungsten inert gas) weld of F82H IEA-heat were carried out. The TIG-weld was distinguished into seven regions with different metallographical structure and hardness, which were the base metal (BM) region (region with almost...
متن کاملTheory for Hydrogen Desorption in Ferritic Steel
After a concise review of the analytical models available for the interpretation of thermal desorption rates for hydrogen effusion from steel, a numerical method that incorporates the essence of local equilibrium and detrapping kinetics has been implemented to account for the real complexity of practical experiments. For example, the model permits the treatment of multiple kinds of traps, uses ...
متن کاملHot tensile properties of 9Cr-2WVTa reduced-activation ferritic/martensitic steel
Reduced-activation ferritic/martensitic steels have been developed by replacing molybdenum by tungsten and niobium by tantalum in commercial elevated-temperature Cr–Mo steels to reduce half-life of radioactive isotopes. The objective of this study was to investigate tensile properties of a reduced-activation ferritic/martensitic steel (9Cr-2WVTa) in normalized-tempered (NT) and quenched-tempere...
متن کاملhot tensile properties of 9cr-2wvta reduced-activation ferritic/martensitic steel
reduced-activation ferritic/martensitic steels have been developed by replacing molybdenum by tungsten and niobium by tantalum in commercial elevated-temperature cr–mo steels to reduce half-life of radioactive isotopes. the objective of this study was to investigate tensile properties of a reduced-activation ferritic/martensitic steel (9cr-2wvta) in normalized-tempered (nt) and quenched-tempere...
متن کاملStrong Ferritic – Steel Welds
There are many steels which are stronger than 2000 MPa, with toughness values exceeding 100 MPa m and which have been in commercial service for many decades. Examples include the marageing alloys and carbide–free bainitic steels. By contrast, welding consumables with a proof strength in excess of 1000 MPa are few and far between. This is because whereas wrought steels can be thermomechanically ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Plasma and Fusion Research
سال: 2017
ISSN: 1880-6821
DOI: 10.1585/pfr.12.1205009