Hydrogen generation and iron partitioning during experimental serpentinization of an olivine–pyroxene mixture

Methane generation during experimental serpentinization of olivine.

Oze et al. (1) observed generation of methane (CH4) during experimental serpentinization of olivine, and use the results to make inferences about sources of methane in natural serpentinites. Their data interpretation, however, is directly contradicted by results of prior studies, critically undermining the credibility of their conclusions. Several prior studies conducted using experimental meth...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Experimental Study of Serpentinization Reactions

Experimental Investigation of Effective Parameters at Laser Sintering the Mixture of Iron and Copper Powder

Optimization of process parameter is one of the ideal goals in laser sintering. The results of this process were measured as output parameters like: density, micro hardening, macro hardening, tension, roughness, stiffness, balling. In this paper, the influence of input parameter such as laser power, scan speed, material powder and etc are surveyed on output parameter like balling affection and ...

Experimental Investigation of Effective Parameters at Laser Sintering the Mixture of Iron and Copper Powder

Optimization of process parameter is one of the ideal goals in laser sintering. The results of this process were measured as output parameters like: density, micro hardening, macro hardening, tension, roughness, stiffness, balling. In this paper, the influence of input parameter such as laser power, scan speed, material powder and etc are surveyed on output parameter like balling affection and ...