Hydrogen Gas Injection for Promoting Decarburization of Ultra Low Carbon Steel in RH Degasser.
نویسندگان
چکیده
منابع مشابه
Failure Investigation of Hydrogen Blistering on Low-strength Carbon Steel
The current study assesses the root causes of hydrogen blisters on low strength carbon steel equipment. For this purpose, some experiments including hardness test, non-destructive test (NDT), metallography, and fractograpghy are conducted. The microstructure of two blisters is assessed by means of optical microscopy and scanning electron microscopy (SEM). The microstructural studies show that t...
متن کاملIsothermal Recrystallization Behavior of Cold-deformed Martensite in an Ultra-low-carbon Microalloyed Steel
One of the most promising ways to produce a grain-refined microstructure in some steel materials is the thermomechanical processing route of subcritical recrystallization annealing of a cold-deformed martensite structure. In the present study, the microstructural evolutions and the associated recrystallization kinetics under various subcritical annealing heat treatment conditions are explored i...
متن کاملfailure investigation of hydrogen blistering on low-strength carbon steel
the current study assesses the root causes of hydrogen blisters on low strength carbon steel equipment. for this purpose, some experiments including hardness test, non-destructive test (ndt), metallography, and fractograpghy are conducted. the microstructure of two blisters is assessed by means of optical microscopy and scanning electron microscopy (sem). the microstructural studies show that t...
متن کاملUltra-low-temperature reactions of carbon atoms with hydrogen molecules
The reactions of carbon atoms with dihydrogen have been investigated in liquid helium droplets at T = 0.37 K. A calorimetric technique was applied to monitor the energy released in the reaction. The barrierless reaction between a single carbon atom and a single dihydrogen molecule was detected. Reactions between dihydrogen clusters and carbon atoms have been studied by high-resolution mass spec...
متن کاملInfluence of shielding gas composition on weld profile in pulsed Nd:YAG laser welding of low carbon steel
Weld area and weld depth/width ratio can be considered to be of the most important geometrical factors in pulsed laser welding. The effects of carbon dioxide and oxygen additions to the argon shielding gas on the weld properties in pulsed laser welding of low carbon steel is investigated. Presence of carbon dioxide and oxygen up to 10 and 15 percent respectively decreases the weld geometrical f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materia Japan
سال: 1994
ISSN: 1340-2625,1884-5843
DOI: 10.2320/materia.33.622