Hydrogen effect on zirconium alloy surface treated by pulsed electron beam
نویسندگان
چکیده
منابع مشابه
The effect of surface roughness on 1050 aluminum alloy weld profile welded by pulsed Nd:YAG laser
Surface roughness in the welding processes is one of the important parameters in the laser welded metal connections which affects laser beam absorption directly. When the laser beam is irradiated to the surface of the base metal, the surface roughness plays an important role in the amount of beam absorption and the amount of melting achieved and directly affects the penetration depth. The main ...
متن کاملThe effect of surface roughness on 1050 aluminum alloy weld profile welded by pulsed Nd:YAG laser
Surface roughness in the welding processes is one of the important parameters in the laser welded metal connections which affects laser beam absorption directly. When the laser beam is irradiated to the surface of the base metal, the surface roughness plays an important role in the amount of beam absorption and the amount of melting achieved and directly affects the penetration depth. The main ...
متن کاملPulsed Electron-Beam Heating
A pulsed, 20 kv electron beam is focussed upon a vapor-deposited thermocouple, and the resulting temperature vs. time response is studied. The experimental data show much scatter, but are consistent with the theoretical prediction that the characteristic thermal response time T is proportional to d , where d is the beam diameter at the thermocouple. From these data, for the soft-glass substrate...
متن کاملEffect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method
Zirconium and its alloys have many applications in orthopedic medicine and compared to stainless steel, titanium and other metals used in the manufacture of implants has higher strength and corrosion resistance. Research shows that the method of preparation and surface modification before coating process has a significant impact on improving the metal implants among which include the sandblasti...
متن کاملDevelopment of Zirconium Thin Films by Pulsed Direct Current Magnetron Sputtering: Effect of Pulsed Parameters
This paper characterizes phases present in thin Zr films at 773 K of substrate temperature. The effect of pulsed parameters such as pulse frequency, duty cycle and pulse power during the deposition of Zr film on Si(100) at the substrate temperature of 773 K has been studied. Formation of α-phase of zirconium was noticed with (001) preferred orientation at 773 K. Preferred orientation was found ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Nuclear Materials
سال: 2015
ISSN: 0022-3115
DOI: 10.1016/j.jnucmat.2014.10.006