Hydrogen Behavior in Molten Alkali Nitrates
نویسندگان
چکیده
منابع مشابه
Local Structure and Okada's Empirical Relation for the Internal Mobility of Cations in Molten Alkali Nitrates
Reprint requests to Dr. Junko Habasaki, Department of Electronic Chemistry, Tokyo Institute of Technology at Nagatsuta 4259, Midori-ku, Yokohama 227, Japan. the latter being derived from molecular dynamics (MD) simulations and X-ray and neutron diffraction studies [12]. The references for the alkali nitrate systems so far studied are given in Table 1 and the empirical parame ters of (1) for so...
متن کاملThermal Diffusion in Molten Binary Mixtures of Silver Nitrate with Alkali Nitrates
Thermal diffusion in the molten systems LiN03 —AgNOs , KNOa — AgNOs , RbN03—AgN03 and CsN03 —AgN03 was detected by means of chemical analysis. Two types of cells were used: the elementary effect was measured directly in cells with vertical temperature gradients, and the coefficient of thermal diffusion (D') was estimated from the steady-state separation obtained in convection cells (horizontal ...
متن کاملComplex metal halides in fused alkali nitrates
The results of this investigation have provided additional information by chemical methods of the extent of association in fused salts. Association effects observed in solubility and rate studies in fused alkali nitrate are shown to be consistent with the assumption that complex ions such as those existing in aqueous solutions are formed between metal ions and halide ions. In addition, the rate...
متن کاملA Cell for Countercurrent Electromigration Experiments for Molten Nitrates
A new type of cell for countercurrent electromigration of molten nitrates is proposed, in which molten NH4NO3 is employed just above its melting point in a large cathode compartment. This cell can be used effectively without trouble of corrosion for the purpose of (1) enrichment of 6Li, (2) enrichment of heavier isotopes such as 7Li, and (3) measurements of relative internal mobility difference...
متن کاملFLOW BEHAVIOR OF MOLTEN METAL IN ALUMINUM LFC PROCESS
The effects of gating system and pattern geometry on the metal flow in the lost foam casting (LFC) process have been investigated using glass covered mold and video recording system. Unlike convectional casting process, the type of the gating system showed little effect on fillability in lost foam, but pattern thickness had large effect on mold filling. The mold filling behavior seems to be con...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ECS Proceedings Volumes
سال: 1976
ISSN: 0161-6374,2576-1579
DOI: 10.1149/197606.0584pv