Hydrogen Absorbing Characteristics of Nano-Structured Palladium Via Bulk Mechanical Alloying.
نویسندگان
چکیده
منابع مشابه
Thermoelectric Performance of Micro/Nano-Structured Bismuth-Antimony-Telluride Bulk from Low Cost Mechanical Alloying
In this work, micro/nano-structured Bi0.5Sb1.5Te3 bulk thermoelectric materials were synthesized by mechanical alloying from elemental shots of Bi, Sb, and Te. Cold pressing and subsequent heat treatments with hydrogen reduction were used to form bulk solid samples with good thermoelectric properties in the temperature range around 75 ̊C to 100 ̊C. In comparison to crystal growth methods and chem...
متن کاملSynthesis of nano-structured sphene and mechanical properties optimization of its scaffold via response surface methodology
Nano-structured sphene (CaTiSiO5) powder was synthesized via mechanical activation and heat treatment method. The synthesized powder was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and simultaneous thermal analysis (STA). The sphene scaffolds were then fabricated via porogen method (using citric acid). Response surface methodology was successfully used to d...
متن کاملTribosynthesis of Fe3−xMnxC Phases via Mechanical Alloying and Annealing
Powderous crystalline materials of the composition Fe3−xMnxC have been prepared by first synthesizing Fe3C via mechanical alloying in a planetary mill followed by the addition of elemental manganese and arc-plasma melting or via the classic ceramic route in an electric furnace. The milling time for the synthesis of Fe3C was significantly reduced through adjusting the parameters of the planetary...
متن کاملEFFECT OF SiC ADDITION ON HYDROGEN DESORPTION PROPERTIES OF NANOCRYSTALLINE MgH2 SYNTESIZED BY MECHANICAL ALLOYING
In this study, the composite material with composition of MgH2-5 wt% SiC has been prepared by co-milling of MgH2 with SiC powder. The effect of milling time and additive on MgH2 structure, i.e. crystallite size, lattice strain, particle size and specific surface area, and also hydrogen desorption properties of obtained composite was evaluated by thermal analyzer method and compared with pure un...
متن کاملThermoelectric performance of lanthanum telluride produced via mechanical alloying
Andrew F. May,1 Jean-Pierre Fleurial,2 and G. Jeffrey Snyder3 1Department of Chemical Engineering, California Institute of Technology, 1200 East California Boulevard, Pasadena, California 91125, USA 2Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Drive, Pasadena, California 91109, USA 3Department of Materials Science, California Institute of Technology, 1200 East ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2001
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.48.960