Hydrocracking of Heavy Oil Using Iron-active Carbon Catalyst. Importance of Mesopore Structure of Active Carbon.
نویسندگان
چکیده
منابع مشابه
New Upgrading Process for Heavy Oil Using Iron/active Carbon Mixture Catalyst
The possibility of optimizing the composition and the structures of the nickel catalysts and the pretreatment and reaction conditions for carbon dioxide reforming with methane is investigated. The optimum catalyst and the pretreatment and reaction conditions are determined employing the orthogonal and uniform design methods. The optimum nickel catalyst gives promising catalytic performance in t...
متن کاملWet air oxidation of phenol using active carbon as catalyst
Catalytic wet air oxidation is a promising alternative for the treatment of phenolic waste water which cannot be treated in conventional sewage plants. Catalytic wet air oxidation of an aqueous phenol solution was conducted in a ®xed bed reactor operating in trickle ̄ow regime. Either active carbon or a commercial copper oxide supported over -alumina was used as catalyst. The performance of bot...
متن کاملinvestigation of the electronic properties of carbon and iii-v nanotubes
boron nitride semiconducting zigzag swcnt, $b_{cb}$$n_{cn}$$c_{1-cb-cn}$, as a potential candidate for making nanoelectronic devices was examined. in contrast to the previous dft calculations, wherein just one boron and nitrogen doping configuration have been considered, here for the average over all possible configurations, density of states (dos) was calculated in terms of boron and nitrogen ...
15 صفحه اولRemoval of Impurities fromWaste Oil by Combination of Eggshell and Eggshell's active Carbon for Biodiesel Production
Waste oil is an inexpensive source for biodiesel production, but the high amount of impurities present (free fatty acids, oxidation products) impedes its practical application. The aim of this work is to assess the purification efficiency of the adsorption process with eggshell and its active carbon. Carbonization of eggshell was done at 200 ºC for 4 hours. For activation of the resultant carbo...
متن کاملPreparation of a Novel Super Active Fischer-Tropsch Cobalt Catalyst Supported on Carbon Nanotubes
The potential of carbon nanotubes (CNT) supported cobalt catalysts for Fischer-Tropsch (FT) reaction is shown. Using the wet impregnation method cobalt on carbon nanotubes catalysts were prepared with cobalt loading varying from 15 to 45 wt. %. The catalysts are characterized by different methods including: BET physisorption, X-ray diffraction, hydrogen chemisorption, and temperature-progra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Japan Petroleum Institute
سال: 2000
ISSN: 0582-4664
DOI: 10.1627/jpi1958.43.17