Hydrocarbon bio-oil production from pyrolysis bio-oil using non-sulfide Ni-Zn/Al2O3 catalyst
نویسندگان
چکیده
منابع مشابه
Pyrolysis of Seaweeds for Bio-oil and Bio-char Production
A pyrolysis study on a species of brown algae Saccharina japonica was carried out in a fixed-bed reactor. The yields of bio-oil and bio-char obtained at 450 C were 47 % and 33 %, respectively. The raw S, japonica, ethanol and acid pretreated samples and the resulting pyrolysis products were also characterized with respect to proximate and ultimate analysis, and higher heating value. The crude b...
متن کاملCatalyst-assisted Conversion of Pyrolysis Bio-oil into Fuels
The aldol condensation of model compounds furfural and acetone on the selected base catalysts have been performed. The activity of MgO was compared with industrially produced hydrotalcite and the series laboratory prepared hydrotalcites. Si×MAl2O4 hydrotalcites (M = Mg, Zn, Ni, Co, Cu, and Fe) were prepared by the solgel method at low calcination temperature of 300°C. The properties of the cata...
متن کاملUpgrading of Pyrolysis Bio-oil: A Review
The increase in the population of the planet and the rapid economic growth and, consequently, the high consumption of energy has created many environmental problems in the globe. Due to these reasons and the lack of renewability of these fossil fuels, there has been a steep trend towards the production of renewable fuels from natural sources, one of which is the production of energy from biomas...
متن کاملBio Gas Oil Production from Waste Lard
Besides the second generations bio fuels, one of the most promising products is the bio gas oil, which is a high iso-paraffin containing fuel, which could be produced by the catalytic hydrogenation of different triglycerides. To broaden the feedstock of the bio gas oil the catalytic hydrogenation of waste lard over sulphided NiMo/Al(2)O(3) catalyst, and as the second step, the isomerization of ...
متن کاملCharacterization of Bio-oil from Palm Kernel Shell Pyrolysis
Pyrolysis of palm kernel shell in a fixed-bed reactor was studied in this paper. The objectives were to investigate the effect of pyrolysis temperature and particle size on the products yield and to characterize the bio-oil product. In order to get the optimum pyrolysis parameters on bio-oil yield, temperatures of 350, 400, 450, 500 and 550 °C and particle sizes of 212–300 μm, 300–600 μm, 600μm...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fuel Processing Technology
سال: 2017
ISSN: 0378-3820
DOI: 10.1016/j.fuproc.2017.04.001