Hydro-Thermal Fatigue of Polymer Matrix Composite Biomaterials
نویسندگان
چکیده
منابع مشابه
Fracture of Ceramic-Polymer Composite Biomaterials
Fracture toughness, strength, and elastic modulus of poly(methyl methacrylate) (PMMA)and poly(buty1 methacrylate) (PBMA)-impregnated alumina ceramics were measured as a function of polymer volume fraction, mean polymer particle size, and interfacial bonding between the polymer and ceramic. Fracture toughness was found to increase with increasing polymer volume fraction and decreasing polymer pa...
متن کاملAn Experimental Investigation on Fracture Analysis of Polymer Matrix Composite under Different Thermal Cycling Conditions
Fracture analysis of glass/epoxy composites under different thermal cycling conditions is considered. Temperature difference, stacking sequence, fiber volume fraction and number of thermal cycles are selected as the experimental design factors. The Taguchi method is implemented to design of the experiment and an apparatus is developed for automatic thermal cycling tests. The tensile tests are d...
متن کاملThrough-thickness thermal conduction in glass fiber polymer–matrix composites and its enhancement by composite modification
Continuous glass fiber polymer–matrix composites are electrically insulating and used for printed wiring boards, but their thermal conductivity needs to be increased without sacrificing the electrical insulation ability. The through-thickness thermal conductivity of these epoxy–matrix composite laminates with in-plane fibers is found to be effectively modeled using the Rule of Mixtures with fib...
متن کاملSurface Degradation of Polymer Matrix Composites Under Different Low Thermal Cycling Conditions
The principal effects of mass degradation on polymer matrix composites (PMCs) are the decay of mechanical properties such as strength, elongation, and resilience. This degradation is a common problem of the PMCs under thermal cycling conditions. In this article, composite degradation was investigated by measurement of total mass loss (TML) using the Taguchi approach. Thermal cycling tests were ...
متن کاملHierarchically constructed metal foam/polymer composite for high thermal conductivity
Most polymeric tribological components are inherently insulative, resulting in susceptibility to failure from frictional heating at the PV limit, which is typically reported as a product of the heat flux terms pressure (P) and sliding speed (V). This letter reports on the design of a tribological composite for increased thermal conductivity and PV limit. The control sample is an unfilled compos...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2019
ISSN: 1996-1944
DOI: 10.3390/ma12223650