Hydriding-Dehydriding Properties of Mg-Rich Mg-Ni-Nd Alloys with Refined Microstructures
نویسندگان
چکیده
منابع مشابه
Hydriding / dehydriding of Mg 87 Ni 3 Al 3 Mm 7 ( Mm = La , Ce -
10 Nanocrystalline Mg87Ni3Al3Mm7 hydrides were produced by reactive mechanical milling (RMM) under hydrogen atmosphere. Milling first under argon, and then under hydrogen atmosphere was also carried out in order to study the effect of the gas atmosphere on the microstructure of the products of milling as well as on their hydriding properties. In both cases, the main product of the milling proce...
متن کاملSynthesis and mechanical properties of nanostructured Mg-Al-Nd alloys
In this work, nanostructured Mg-Al-Nd alloys were successfully fabricated using mechanical alloying method. Phase structures of the milled powders and the extruded rods were examined using X-ray diffraction (XRD) and the microstructures were observed using a transmission electron microscope (TEM). The element distributions were also examined by an energy dispersive spectroscopy (EDS) system. Th...
متن کاملIn-situ deformation characterization of Nd-containing Mg alloys
An in-situ characterization technique combining mechanical testing inside a scanning electron microscope (SEM) with electron backscatter diffraction (EBSD) analysis was employed to study the tensile deformation behavior of Nd-containing Mg alloys over the temperature range of 50-250°C. EBSD data were collected before and after the experiments. The active slip and twinning systems were identifi ...
متن کاملPhase Equilibria, Crystal Structure and Hydriding/Dehydriding Mechanism of Nd4Mg80Ni8 Compound
In order to find out the optimal composition of novel Nd-Mg-Ni alloys for hydrogen storage, the isothermal section of Nd-Mg-Ni system at 400 °C is established by examining the equilibrated alloys. A new ternary compound Nd4Mg80Ni8 is discovered in the Mg-rich corner. It has the crystal structure of space group I41/amd with lattice parameters of a = b = 11.2743(1) Å and c = 15.9170(2) Å, charact...
متن کاملCREEP AGE FORMING OF Al-Zn-Mg ALLOYS WITH OPTIMIZATION OF MECHANICALl PROPERTIES
Creep age forming (CAF) is one of the novel methods in aerospace industry that has been used to manufacture components of panels with improved mechanical properties and reduced fabrication cost. CAF is a combined age-hardening and stress-relaxation that are responsible for strengthening and forming, respectively. This paper deals with the experimental investigations of mechanical and springback...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2002
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.43.1732