Hydride Rim Formation in E110 Zirconium Alloy during Gas-Phase Hydrogenation
نویسندگان
چکیده
منابع مشابه
STRUCTURAL INTEGRITY CHANGES IN THE Zr-Nb ALLOY DURING HYDRIDE PHASE TRANSFORMATION UNDER THE THERMAL SHOCK
Structural changes and properties of zirconium alloy subjected to the thermal shock in the solar furnace were investigated. Specimens were prepared from unirradiated cold-worked RBMK Zr-2.5Nb fuel channel pressure tube material after adding hydrogen to the sections of the tubes up to 150 ppm. Tests were done at temperatures up to 1460 C and heating rates 50-83 C per second. After thermal treatm...
متن کاملNickel Hydrogenation Composite Catalysts Modified by Zirconium in Competitive Benzene Hydrogenation: Effect of Modifiers
A co-impregnation method was applied to the Ni/Zr-HMS/HZSM-5 catalyst (with various amounts of zirconium) during the hydrogenation of benzene. The physicochemical properties of the prepared nickel catalyst were characterized using X - ray diffraction, X - ray fluorescence, Fourier transform infrared spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy, temperature-programmed desor...
متن کاملGas phase reactions of 1,3,5-triazine: proton transfer, hydride transfer, and anionic σ-adduct formation.
The gas phase reactivity of 1,3,5-triazine with several oxyanions and carbanions, as well as amide, was evaluated using a flowing afterglow-selected ion flow tube mass spectrometer. Isotopic labeling, H/D exchange, and collision induced dissociation experiments were conducted to facilitate the interpretation of structures and fragmentation processes. A multi-step (→ HCN + HC(2)N ...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
intermetallic phase formation during combustion synthesis of mechanically activated ni-ti alloy
intermetallic phase formation and oxidation reaction during combustion synthesis (cs) of ni-ti equiatomic mixture are affected by mechanical activation (ma) and pre-heating conditions. important parameters are ignition time, reaction duration, temperature rise, microstructural change, titanium oxidation and intermetallic phase formation. superelasticity and shape memory effects are influenced b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2020
ISSN: 2075-4701
DOI: 10.3390/met10020247