Hydraulic stability and wave overtopping of Starbloc® armored mound breakwaters
نویسندگان
چکیده
منابع مشابه
مدلسازی عددی نوسانات سطح آب و تغییرات فشار منفذی در بدنه موجشکنهای توده سنگی سنتی
When studying the structural response of rubble mound breakwaters to wave loading, the knowledge of water surface fluctuations, pore pressure variations and related wave attenuation inside the porous structure is important since the pore pressures affect most responses, such as wave run-up, wave overtopping, reflections, transmission and the hydraulic and geotechnical stability of the breakwate...
متن کاملAn Investigation on the Stability of Rubble Mound Breakwaters with Armour Layers of Antifer Cubes
This paper presents the results of hydraulic model tests on the stability of rubble mound breakwaters with armour layers of antifer cubes. The tests were performed using irregular waves. The effect of wave parameters and the structure slope on the stability of these artificial armour units has been investigated and the stability formulae have been derived. Finally a comparison between these for...
متن کاملNumerical Simulation of Wave Overtopping Over Composite Berm Breakwater
Breakwaters have changed a lot during their design history. Overtopping is an important parameter that its evaluation and reduction has always been noticed. In this study, the wave overtopping of composite berm breakwater as a new conceptual structure has been investigated numerical modeling was performed using FLOW-3D software. Then, based on a laboratory model conducted by Losada et al, cali...
متن کاملA new numerical approach to the study of the interaction between wave motion and roubble mound breakwaters
Until recently, physical models were the only way to investigate into the details of breakwaters behavior under wave attack. From the numerical point of view, the complexity of the fluid dynamic processes involved has so far hindered the direct application of Navier-Stokes equations within the armour blocks, due to the complex geometry and the presence of strongly non stationary flows, free bou...
متن کاملWave Reflection at Submerged Breakwaters
Several types of structures are used in Coastal Engineering with the aim of preventing shoreline erosion, such as groynes, detached breakwaters, submerged breakwaters, etc. Submerged breakwaters have the advantage of their minimal visual impact, which has made them ever more popular (Chang & Liou, 2007). When the incoming waves impinge on a submerged breakwater, a process of energy transformati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ocean Engineering
سال: 2018
ISSN: 0029-8018
DOI: 10.1016/j.oceaneng.2017.12.061