Hydraulic Design of Stormwater Infiltration Facility Including Uncertainties
نویسندگان
چکیده
منابع مشابه
The Hydraulic Efficiency of Simple Stormwater Ponds
This paper investigates the hydrodynamic characteristics of nine stormwater pond configurations. These ponds represent an extension of earlier work by Persson (1999) who proposed the thirteen pond configurations currently used as a guide in the hydrodynamic component of the Cooperative Research Centre for Catchment Hydrology (CRCCH) Model for Urban Stormwater Improvement Conceptualisation (MUSI...
متن کاملHydrologic Model Developed for Stormwater Infiltration Practices
Rain garden (RG) has been developed and applied to low-impact designs for the purpose of water quality enhancement. A RG consists of a surface storage basin and subsurface infiltrating layers. The storage basin is designed to be shallow, flat, and wide with an overtopping weir to pass excessive flows, while the subsurface infiltrating system is composed of two layers of filtering media. The upp...
متن کاملOptimum Design of Hydraulic Excavator
Excavators are heavy construction equipment consisting of a boom, dipper (or stick), bucket and cab on a rotating platform known as the "house". In this paper the hydraulic shovel excavator is analyzed through the D-H method. The shovel working device with the bucket capacity of 36m3 is optimized. The determination of the objective function, variables and constraints are described in ...
متن کاملSpatiotemporal evolution of clogging of stormwater infiltration systems
Clogging of stormwater infiltration systems is an issue of major importance. Actually, it does not only lead to flow rate reduction and increased ponding but it also reduces treatment capacity when infiltration systems are equipped with bypass devices. The aim of this paper is to present the results obtained in this context. The first objective is to understand and characterize clogging evoluti...
متن کاملImpact of input data uncertainties on stormwater model parameters
The use of urban drainage models requires careful calibration, where model parameters are selected in order to minimize the difference between measured and simulated results. It has been recognized that often more than one set of calibration parameters can achieve similar model accuracy. A probability distribution of model parameters should therefore be constructed to examine the model’s sensit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis
سال: 2016
ISSN: 1211-8516,1211-8516
DOI: 10.11118/actaun201664051483