HYDRATION MODEL OF PORTLAND CEMENT

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling of Hydration Kinetics and Shrinkage of Portland Cement Paste

MODELING OF HYDRATION KINETICS AND SHRINKAGE OF PORTLAND CEMENT PASTE

متن کامل

SEM investigation of microstructures in hydration products of portland cement

Portland cement is the one of the main ingredients in the manufacture of many building materials include concrete composites. The phase composition of hydration products is controlled by means of XRD and DTA/TG analysis. Observations of phase changes and microstructure of maturing cement pastes can also be observed using scanning electron microscopy (SEM) techniques combined with chemical analy...

متن کامل

Interaction of tartaric acid during hydration of Portland cement

Hydration of Ordinary Portland cement (OPC) in the presence of tartaric acid has been studied by using different techniques. Calorimetric studies have shown a rapid enhanced heat evolution within 5 min of hydration in presence of 1.0 wt% tartaric acid with a strong retardation of silicate phase hydration. DSC and X-ray diffraction studies have confirmed the formation of calcium tartarate hydrat...

متن کامل

Hydration Kinetics Model of Supersulfated Cement

Supersulfated cement, with higher waste utilization and less cement clinker is the inevitable trend of the development of green material in the rapid developed industrial era. For the wide use of supersulfated cement in our country, the hydration heat is analyzed in this paper. The hydration kinetic parameters are obtained from the hydration heat and hydration heat rate curves measured by the i...

متن کامل

Measurements and Predictions of Heat of Hydration of Portland Cement Using Isothermal Conduction Calorimetry

Two industrial ASTM Portland cements were carefully tested for heat of hydration (HOH) continuously up to 7 days at 23o C using isothermal conduction calorimetry in accordance to ASTM C1702. Internal and external mixing procedures were implemented. The results for HOH measurements at 7 days using isothermal calorimetry were compared to those obtained through heat of solution method (ASTM C186)....

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)

سال: 2005

ISSN: 1340-4202,1881-8153

DOI: 10.3130/aijs.70.1_7