Hydrate capture CO2 from shifted synthesis gas, flue gas and sour natural gas or biogas

Flue gas treatment for CO2 capture

This report is in two sections: the first describes the flue gas and its treatment in post-combustion capture and the second covers the flue gas in oxyfuel combustion capture. The main components of the flue gas in pulverised coal combustion for postcombustion capture are CO2, N2, O2 and H2O, and air pollutants such as SOx, NOx, particulates, HCl, HF, mercury as well as other contaminants. The ...

CO2 Capture from Flue Gas by Phase Transitional Absorption

CO2 Capture from Natural Gas Combined Cycles

CO2 capture from fossil fuel power plants is increasingly proposed for greenhouse gases emission mitigation. It can be applied to coal power stations (with boiler and steam cycle or with gasification) or to natural gas combined cycles (NGCC). The first case is probably the most important in a mid-term perspective, due to: (i) the larger amount of avoided carbon per unit of electricity produced,...

Investigation of CO2 and H2O Addition to Natural Gas for Production of Synthesis Gas

General modeling and optimization of syngas production via noncatalytic autothermal partial oxidation of methane are carried out using our developed scientific software which was based on the minimization of total Gibbs energy. In this work, a novel application of the direct search and Newton-Raphson methods was introduced to apply to optimization of a complex chemical reaction. Sensitivity ana...

Development of New Potassium Carbonate Sorbent for CO2 Capture under Real Flue Gas Conditions

In this paper, the development of a new potassium carbonateon alumina support sorbent prepared by impregnating K2CO3 with an industrial grade of Al2O3 support was investigated. The CO2 capture capacity was measured using real flue gas with 8% CO2 and 12% H2O in a fixed-bed reactor at a temperature of 65 °C using breakthrough curves. The developed sorbent showed an adsorption capacity of 66.2 mg...