Hybrid Zeolite SAPO-34 Fibres Made by Electrospinning
نویسندگان
چکیده
منابع مشابه
Optimizing the crystallinity and acidity of H-SAPO-34 by fluoride for synthesizing Cu/SAPO-34 NH3-SCR catalyst.
A series of H-SAPO-34 zeolites were synthesized by a hydrothermal method in fluoride media. The as-synthesized H-SAPO-34 zeolites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), N2 physisorption, temperature-programmed desorption of NH3 (NH3-TPD) and nuclear magnetic resonance (NMR) measurements. The results showed that a certain concentration of F(-) anions p...
متن کاملTubular MFI Zeolite Membranes Made by In-Situ Crystallization
Polycrystalline MFI zeolite membranes were prepared on α-alumina tubular support by hydrothermal treatments at 413 K. The synthesized zeolite membranes were characterized by XRD, SEM and single gas permeation. The influence of hydrothermal treatment steps and the calcination time on the zeolite layer formation were investigated. MFI zeolite membrane prepared by four subsequent hydrothermal ...
متن کاملNanometre diameter fibres of polymer, produced by electrospinning
Electrospinning uses electrical forces to produce polymer fibres with nanometre-scale diameters. Electrospinning occurs when the electrical forces at the surface of a polymer solution or melt overcome the surface tension and cause an electrically charged jet to be ejected. When the jet dries or solidifies, an electrically charged fibre remains. This charged fibre can be directed or accelerated ...
متن کاملSynthesis of SAPO-34 catalysts via controlled crystal growth
Introduction SAPO-34 is a silicoaluminophosphate zeolite with 8-membered ring windows (~0.38nm) displaying chabazite structure. SAPO-34 is an efficient catalyst showing improved catalytic performance in reactions such as methanol conversion to olefins [1], oxidative dehydrogenation of propane [2], conversion of light alkenes [3]. Its catalytic properties are mainly attributed to its mild acidit...
متن کاملMan-made Mineral Fibres
practice, the detection Ii mit of scanning electron microscopy is about 0.1 j.m (Middleton, 1982). Transmission electron microscopy may be required to detect very thin fibres (Rood & Streeter, 1985). The elemental composition of individual fibres can be determined with an energy-dispersive X-ray ana1ysis attachment combined with an electron microscope (Middleton, 1982). Fibres are counted and s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2018
ISSN: 1996-1944
DOI: 10.3390/ma11122555